Vtec not working help anyone please
#1
Thread Starter
Join Date: Feb 2008
Location: Alpharetta, Georgia, USA
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Vtec not working help anyone please
ok so here is the low down
i had a d16z6 in my car and it started knockin so i went out and bought a d16zc vtec (japanese equivalent to d16z6).
vtec work before i changed the engine and now it doesn't want to work at all
i didn't change the in take manifolds but that shouldn't cause any problems right.
so i re-wired the ecu according to the pinout guides online and it still is throwing an engine light and vtec isn't working.
please shed some light on this problem im having.
i had a d16z6 in my car and it started knockin so i went out and bought a d16zc vtec (japanese equivalent to d16z6).
vtec work before i changed the engine and now it doesn't want to work at all
i didn't change the in take manifolds but that shouldn't cause any problems right.
so i re-wired the ecu according to the pinout guides online and it still is throwing an engine light and vtec isn't working.
please shed some light on this problem im having.
Thread
Thread Starter
Forum
Replies
Last Post