vtec engagement on d-series
#6
Honda-Tech Member
Join Date: Sep 2002
Location: Aspen, CO
Posts: 1,753
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boostedcivicsir)
ya but on a completely stock car you should be able to hear the whine of vtec when it kicks in, i made a light that runs from the vtec solonoid to help me know when im in vtec! actually since i did a few more mods i can feel a little vtec and definently hear it.
#7
Re: (tek_civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tek_civic »</TD></TR><TR><TD CLASS="quote">few more mods i can feel a little vtec and definently hear it.</TD></TR></TABLE> yah myne did the same too
Trending Topics
#12
Re: (H8200RPM)
i had a greddy turbo/hondata. Redline was set at 8400rpms. When vtec kicked in at 4400rpms the turbo hit full 14psi and that was a vtec rush alll 229hp to the wheels
#14
Honda-Tech Member
Join Date: Sep 2002
Location: Aspen, CO
Posts: 1,753
Likes: 0
Received 0 Likes
on
0 Posts
Re: (AlphaQup)
ya i have the following to help me hear and somewhat feel the MaD VteC yO!
short ram intake with heat sheild and cold air ramp.
greddy header
only an axleback exhaust
streight pipe
comp 59300 camshaft (best mod of all) untuned
had nitrous and on that you could REALLY hear vtec
short ram intake with heat sheild and cold air ramp.
greddy header
only an axleback exhaust
streight pipe
comp 59300 camshaft (best mod of all) untuned
had nitrous and on that you could REALLY hear vtec
#15
Re: (tek_civic)
I could hear it fine when it was stock... and it was a noticalbe jump in power too...
once the intake/exhaust were on it was even more noticable...
but now with a header/cat it kinda evened the power curve up... so now I can barely feel or hear it... it feels like it's more of a steady climb in power now...
once the intake/exhaust were on it was even more noticable...
but now with a header/cat it kinda evened the power curve up... so now I can barely feel or hear it... it feels like it's more of a steady climb in power now...
Thread
Thread Starter
Forum
Replies
Last Post