mrgauge

Can I do a mini-me swap on a d16y7 with a DOHC head? If so what engine do i get the head off of?

james p.

nope.

search buddy.

Jaysun

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mrgauge &raquo;</TD></TR><TR><TD CLASS="quote">Can I do a mini-me swap on a d16y7 with a DOHC head? If so what engine do i get the head off of? </TD></TR></TABLE>

https://honda-tech.com/zerothread?id=878010

welcome

96CivicBoostCoupe

no way, dohc head is wider than the sohc block

Ax3l

Use a d16y8 or d16z6 head and get the tranny and Intake mani too. Search for alot of writeups. Good luck.

Agent_STFU

This will not work.

I suggest that you start using the search feature before you post. It will make your life alot easier here on Honda-Tech

JDM_Ej

You can make it work. Just be sure to use lots and lots of copper spray.


That was a joke, dont try doing that lol.

Agent_STFU

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_Ej &raquo;</TD></TR><TR><TD CLASS="quote">You can make it work. Just be sure to use lots and lots of copper spray.</TD></TR></TABLE>

Haha, yeah. When you're done, try the water injection for huge horsepower gains. Just run your windshield washer fluid lines straight into your intake. Jump in the car, take her to 5k RPM, and pull that left-side handle back and smoke vettes!

mrgauge

thanks thats what i thought. Is the y8 head the best head that will give me the highest compression?