Which jumper harness should i use
02-24-2012, 12:37 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2011
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Which jumper harness should i use
I have a 96 dx hatch that i just swapped a "poor man's type r" in. it is a jdm b18c block with a pr3 head and pr3 pistons. i am actually using a 99 ex coupe wiring harness in my 96 hatch so and i was wondering should i use a obd2a or obd2b jumper harness (because im not using the 96-98 harness) to obd1 because i want to run a chipped p28 with a b18c5 basemap. I was also wondering if it is safe to run your car on a basemap. any advice would be appreciated thanks
02-24-2012, 12:53 PM
#2
Honda-Tech Member
Join Date: Jun 2005
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Re: Which jumper harness should i use
Its not looking good. check these links out.
http://technet.ff-squad.com/wiring.obd2b.htm
http://technet.ff-squad.com/wiring.obd2a.htm
http://technet.ff-squad.com/wiring.obd2b.htm
http://technet.ff-squad.com/wiring.obd2a.htm
Thread
Thread Starter
Forum
Replies
Last Post
just_dung
Honda Civic / Del Sol (1992 - 2000)
11
01-07-2013 11:42 PM
