upper control arm bushing - Does the bushing or whole arm need to be replaced?
#1
upper control arm bushing - Does the bushing or whole arm need to be replaced?
finally found out what the clunk was in my front end, jacked my car up today to take a look at it. when i shook the wheel to look for play i noticed that the upper control arm had some play front to back. my question is, can you just replace the bushing or do you need to replace the whole arm. any one else had problems with these
#2
Honda-Tech Member
Re: upper control arm bushing - Does the bushing or whole arm need to be replaced?
You have to replace the upper control arm. They do not sell the upper baljoint or the bushings separately.
#3
Honda-Tech Member
Join Date: Dec 2004
Location: Eastern NC, USA
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Re: upper control arm bushing - Does the bushing or whole arm need to be replaced?
if its a EG the control arm bushing part number is 51455-SR3-004. As for ball joints honda doestnt sell just the upper balljoint, u would need to purchase the whole arm.
http://www.hondaautomotiveparts.com/...tcgry5=KNUCKLE
http://www.hondaautomotiveparts.com/...tcgry5=KNUCKLE
Thread
Thread Starter
Forum
Replies
Last Post
Cheeseng35
Honda Accord & Crosstour (2003 - 2012)
1
12-13-2017 04:04 PM
killaj12
Honda Civic / Del Sol (1992 - 2000)
1
02-13-2007 12:55 PM