asianrob

alright heres the deal
i was soldering the connections on my passenger side turn signal ( i had to rework my connections for my side markers) anyways, i had it on to test it to see if it was working, I accidently touched the red and the green wires together, now my Turn signals, guages (they light up), and clock dont work. my hazards work, and everything else work.

what could be the problem?
and yes all the fuses are good.

any suggestions would be nice.

i am thinking i have to chase some wires, but i dont know where to start.

asianrob

checked the plug "A" under the dash and the R/L turn signal wires lit up when the hazards were on. the cluster lights up but none of the wires for the tach, speedo etc, didnt light up when tested from what i could tell. any suggestions?

Former User

Double check fuse 15.

slowturbocx

The fuse in the Engine bay. I think it's 7.5 amp.

Former User

It's a 10A dash fuse.

asianrob

the back fuse is still good and has power going to it.

the the 10A dash fuse im assuming your talking about is the instrument, tail light, and license light, is also good.

Former User

Turn the key to ON(II) and check whether dash fuse 15 has voltage to body ground at both top test tabs.

asianrob

ill try that out asap