Turbo Install EG PICS!!!!!!
#1
Thread Starter
Join Date: Nov 2003
Location: Ann Arbor, MI, USA
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
Turbo Install EG PICS!!!!!!
ok heres some backround info....
'93 Honda civic Si (hatch)
Delsol d16z6 ( asmallsol's [colins] old engine )
tokico illumina 5 way adjustables
Skunk2 coil overs
ES Front & Rear bushing set
2 flat black rota slipstreams on the rear steelies on the front
VIS carbon fiber hood
JDM smoked amber corners
----------------------------------------------------
*~*~*~*~*~*Turbo Schtuff*~*~*~*~*~*~*
----------------------------------------------------
Saab 900 Garrett/Airesearch T3 .48/.42 (tiny)
SSautochrome.com Turbo manifold
TiAL 38mm wastegate ( dumptube to atmos. )
Greddy Type S BOV
fast-turbo.com Oil lines
Johnnyracecar.com 5" FMIC
All mandrel bent charge pipes
8/10/04 11:46PM... Chalk up another boosted SOHC hatch to the list in Michigan, its done, had hella fitment issues with the bumper but its strait... i'll update longer with more pics later, right now its off to the hottub for some R/R.. bbl kids!
8/10/04 4:43AM... Ok so first off i spoke WAY to soon about the oil lines, the length was all off and none of the oil feed fittings were designed for the turbo, so home depot became my friend REALLY quick... back to the oil pan, the JB weld went to ****, even after 16+ hours of curing, so the guys at ClubConceptz (actually the one that looks like paul walker) hooked it up with a new oilpan fitting and welding (sp), Although i also took my turbo up there to have them clock it, they sadly spent 10 min on it and said "oh well no go on the clocking just worked on it for 10 min and wouldnt budge sorry" so -$20.00 later i had a turbo oil pan and a non-clocked turbo... Took the bumper off today and started cutting away for the FMIC yet kept breaking dremel blades :-\ then finally got the turbo clocked after hitting it with a sledge, heating it up for a 1/2 hour and using a whole can of PB blaster on it (thumbs up for PB Blaster!)... everythings mounted now and looks like the below pictures, there before and after in there.. Tomorrow the FMIC comes in and the project is COMPLETE!!!!!!!
8/9/04 12:28AM... Ok so this started out to be easy and yet got harder and harder as the day went on and a lot of cuts and nics. I've already broken 3 droplight blubs, and have 12 misquito bites, 26 missed calls, smoked 18 cigarettes, and drank 3 diet cokes. The oil lines were a snap, i drilled the oil pan fitting and am JB welding it as we speak. The charges pipe are still being a bitch and not wanting to allign properly.. well i'll shut up and take the pics now :-D brb!!!!!!!!!
Heres where i am at now :-)
Rear of the car in my so-called "mansion" :-p
Engine bay shot, Minus FMIC and charge pipes... balller eh?
Oilpan fitting sprayed black and "push fit" oil line...
Tiny Saab 900 turbo, Loud as hell IT SCREAMS!!!!!!!
Gotta love the bright orange jack :-D
Another engine bay shot, can you tell i am stoked about the boosting :!:
Ok so the hood fitment was off for some reason but then it went back to norm. after the install was done...
Me, sober :evil: at 5:00am with my three finger mutant hands and reeeeaaaaallllllllyyyyy dirty.
hey look its my BOOBIE! shes weird though, she sleeps with her eyes 1/2 open its cool though, shes a stunna![/i]
'93 Honda civic Si (hatch)
Delsol d16z6 ( asmallsol's [colins] old engine )
tokico illumina 5 way adjustables
Skunk2 coil overs
ES Front & Rear bushing set
2 flat black rota slipstreams on the rear steelies on the front
VIS carbon fiber hood
JDM smoked amber corners
----------------------------------------------------
*~*~*~*~*~*Turbo Schtuff*~*~*~*~*~*~*
----------------------------------------------------
Saab 900 Garrett/Airesearch T3 .48/.42 (tiny)
SSautochrome.com Turbo manifold
TiAL 38mm wastegate ( dumptube to atmos. )
Greddy Type S BOV
fast-turbo.com Oil lines
Johnnyracecar.com 5" FMIC
All mandrel bent charge pipes
8/10/04 11:46PM... Chalk up another boosted SOHC hatch to the list in Michigan, its done, had hella fitment issues with the bumper but its strait... i'll update longer with more pics later, right now its off to the hottub for some R/R.. bbl kids!
8/10/04 4:43AM... Ok so first off i spoke WAY to soon about the oil lines, the length was all off and none of the oil feed fittings were designed for the turbo, so home depot became my friend REALLY quick... back to the oil pan, the JB weld went to ****, even after 16+ hours of curing, so the guys at ClubConceptz (actually the one that looks like paul walker) hooked it up with a new oilpan fitting and welding (sp), Although i also took my turbo up there to have them clock it, they sadly spent 10 min on it and said "oh well no go on the clocking just worked on it for 10 min and wouldnt budge sorry" so -$20.00 later i had a turbo oil pan and a non-clocked turbo... Took the bumper off today and started cutting away for the FMIC yet kept breaking dremel blades :-\ then finally got the turbo clocked after hitting it with a sledge, heating it up for a 1/2 hour and using a whole can of PB blaster on it (thumbs up for PB Blaster!)... everythings mounted now and looks like the below pictures, there before and after in there.. Tomorrow the FMIC comes in and the project is COMPLETE!!!!!!!
8/9/04 12:28AM... Ok so this started out to be easy and yet got harder and harder as the day went on and a lot of cuts and nics. I've already broken 3 droplight blubs, and have 12 misquito bites, 26 missed calls, smoked 18 cigarettes, and drank 3 diet cokes. The oil lines were a snap, i drilled the oil pan fitting and am JB welding it as we speak. The charges pipe are still being a bitch and not wanting to allign properly.. well i'll shut up and take the pics now :-D brb!!!!!!!!!
Heres where i am at now :-)
Rear of the car in my so-called "mansion" :-p
Engine bay shot, Minus FMIC and charge pipes... balller eh?
Oilpan fitting sprayed black and "push fit" oil line...
Tiny Saab 900 turbo, Loud as hell IT SCREAMS!!!!!!!
Gotta love the bright orange jack :-D
Another engine bay shot, can you tell i am stoked about the boosting :!:
Ok so the hood fitment was off for some reason but then it went back to norm. after the install was done...
Me, sober :evil: at 5:00am with my three finger mutant hands and reeeeaaaaallllllllyyyyy dirty.
hey look its my BOOBIE! shes weird though, she sleeps with her eyes 1/2 open its cool though, shes a stunna![/i]
#6
Honda-Tech Member
oooooooooohhh
heard/seen some horror stories about the ssautochrome mani's man!
you might want to consider welding on some more metal to support the weight of the turbo, from what i've read, they crack easily.
heard/seen some horror stories about the ssautochrome mani's man!
you might want to consider welding on some more metal to support the weight of the turbo, from what i've read, they crack easily.
Trending Topics
#8
that sleepin with the eyes open freaks me out my friends does that, weird... yeah ive hear some horror stories bout them ssautochrome manis..looks good though.. soon me sol will be boosted.. what ya plan on runnin for boost??
#14
Honda-Tech Member
Join Date: Mar 2002
Location: Los Angeles CA, Houston TX
Posts: 4,605
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Install EG PICS!!!!!! (CosmoE36)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CosmoE36 »</TD></TR><TR><TD CLASS="quote">that chick sleeping with her eyes half open is freaky.... its liek sh grew up in the hood and has to watch her back haha</TD></TR></TABLE>
LOL!!!!!
LOL!!!!!
#15
Honda-Tech Member
Join Date: Jul 2002
Location: Montgomery Village, MD
Posts: 4,582
Likes: 0
Received 0 Likes
on
0 Posts
Re: Turbo Install EG PICS!!!!!! (Steeze)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Steeze »</TD></TR><TR><TD CLASS="quote">hey look its my BOOBIE! </TD></TR></TABLE>
where?
where?
#18
Thread Starter
Join Date: Nov 2003
Location: Ann Arbor, MI, USA
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
i know isnt that freaky ****?! wowzers! the manifold will be braced soon, i bought the turbo from a place in Mi called Michigan Imports, got it for $100.00 bucks, got the mani for $168.00 shipped, Tyrus FMIC 5" $155, charge pipes/all oil lines/TiAL 38mm wastegate w/ dumptube/Greddy type s BOV all for 525, good deals?
#25
Re: (mooseknuckle)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mooseknuckle »</TD></TR><TR><TD CLASS="quote">
My hands have been dirtier working on my mountain bikes...lol</TD></TR></TABLE>
my hands are dirtier when i **** in my hand.....
My hands have been dirtier working on my mountain bikes...lol</TD></TR></TABLE>
my hands are dirtier when i **** in my hand.....