turbo help! need some one
#1
Thread Starter
Join Date: Apr 2007
Location: Johnston, Iowa, United States
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
turbo help! need some one
so im putiing my turbo parts together and i was wondering were does the wastegate need to dump at.? stupid question i know. pictures would be nice or instrutions. spare me the embarasment....
#2
Honda-Tech Member
Join Date: Apr 2003
Location: Louisville, KY, 40222
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo help! need some one (spotscivic)
For future reference you should post this in the FI section.
The waste gate can either dump the atmosphere (will not pass SMOG test if you have to worry about that) or you can have it recirculate back into the exhaust. Basically you just have a pipe that goes from the waste gate "exhaust" and other end of the pipe welded into the exhaust pipe.
The waste gate can either dump the atmosphere (will not pass SMOG test if you have to worry about that) or you can have it recirculate back into the exhaust. Basically you just have a pipe that goes from the waste gate "exhaust" and other end of the pipe welded into the exhaust pipe.
#5
Honda-Tech Member
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes
on
2 Posts
Re: turbo help! need some one (spotscivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spotscivic »</TD></TR><TR><TD CLASS="quote">dump the atmosphere ??? so just into the air.</TD></TR></TABLE>
Yeah, that's where a lot of pple have it going, just have the tube hang.
Yeah, that's where a lot of pple have it going, just have the tube hang.
Thread
Thread Starter
Forum
Replies
Last Post
poorman's type-r
Mid-West (Sales)
4
07-08-2007 08:44 PM
GForceInteg
Forced Induction
23
03-30-2005 02:01 PM