troubleshoot THIS!
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: Sierra Vista AZ
Posts: 2,356
Likes: 0
Received 0 Likes
on
0 Posts
troubleshoot THIS!
obd2 del sol with an obd1 gsr engine.
it runs with an obd2 p28 just fine, but using an obd1 jumper harness, the obd1 p72 runs like *** and cuts off at 4500rpm
HELP ME HELP A FRIEND, the only thing i can think of is his shock tower harness is not compatible
the original engine in the del slo was a d16z6
it runs with an obd2 p28 just fine, but using an obd1 jumper harness, the obd1 p72 runs like *** and cuts off at 4500rpm
HELP ME HELP A FRIEND, the only thing i can think of is his shock tower harness is not compatible
the original engine in the del slo was a d16z6
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: Sierra Vista AZ
Posts: 2,356
Likes: 0
Received 0 Likes
on
0 Posts
Re: troubleshoot THIS! (monicle)
its the b18 harness
del sol d16z6 shock tower harness,
a obd2-obd1 jumper ecu harness
elaborate on "re-pin" if the del sol is obd2 , and the engine is obd1, what needs to be re-pinned? all the wires match up on the dist btw
del sol d16z6 shock tower harness,
a obd2-obd1 jumper ecu harness
elaborate on "re-pin" if the del sol is obd2 , and the engine is obd1, what needs to be re-pinned? all the wires match up on the dist btw
Thread
Thread Starter
Forum
Replies
Last Post
greg677
Honda Civic / Del Sol (1992 - 2000)
3
09-10-2016 08:54 AM