.Trouble Shooting Ls/vtec swap
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2004
Location: Owego, NY, USA
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
.Trouble Shooting Ls/vtec swap
So I've been slowly and steadly been working on my car for about a year now and I'm almost about done. However I've hit a snag and cant seem to figure out whats up. My car is a 93 Civic Dx shell with a 2000 gsr head mounted to a b18a bottom end. Its wired with a B16 harness and uses an OBD-1 dizzy. I just recieved the ecu back from having it chipped and it is a P05 which was converted to a P28 and chipped for my motor. The turns over but dies after about 2 seconds and even if i try to give it gas it wont stay alive. Any one have any idea what would be?
#2
footwork mastery
Join Date: Sep 2004
Location: Bigger, Faster, Smarter, Stronger
Posts: 5,982
Likes: 0
Received 8 Likes
on
6 Posts
Re: .Trouble Shooting Ls/vtec swap (egreenmachine)
lets start with the basics... any cels? may sound dumb but my friends car did this and he had the map/ tps flipped? you didn't give much to go off of here.
Thread
Thread Starter
Forum
Replies
Last Post