likenother

Alright gents, I own a 96 Coupe with an SiR-II swap into it and am currently having some tranny problems.

Problem:
A few days ago I got in my car to head off to work, only to find out that my car didn't want to go into gear. When I shifted over to put it into first, It felt like it was already in gear(it was in neutral) and wouldn't go into gear. I also noticed as I tried to shift into gear, the car would start to roll forward/backward as if the clutch was still gripping the flywheel. After pleading/yelling at the car I finally managed to 'forcefully' get the car to slide into first. After getting it to go into gear, it would shift smoothly as if nothing was wrong. I would say this happens about 80% of the time I attempt to drive the car.

At first I thought this would be related to a clutch going bad, which was good because I have a replacement one on hand already, but after talking to my friend we think it might be the Master/Slave cylinder going bad. Anyone have any idea? I wanted to get another opinion as to what this could be before I pull my motor out to get in the tranny.

Thanks in advace,
-Greg

likenother

bump

likenother

bump

JDAMC

Did you check the clutch fluid. It may be low.

likenother

We checked that and its filled up. We also bleeded the clutch line and that didn't help any ethier.

likenother

TTT!

likenother

Bump, no one?