Tranny issues..
#1
Honda-Tech Member
Thread Starter
Tranny issues..
Heres the story..
I rebuilt my motor this weekend. When the swap was out i took the casing off the tranny to put a new seal on to ensure it wont leak.. (i have a small leak but realized it was the axle seal..)
But i put it back together like it came apart. Didnt touch anything else.
But now... this is kinda hard to explain. but.
Its really hard to get into gear. And say im rolling backwards a lil bit. and i put it in first gear the car will stop rolling. Its like something is binding.
Any one ever run into this problem?
Yes i did bleed the clutch Numerous times and done right.
I rebuilt my motor this weekend. When the swap was out i took the casing off the tranny to put a new seal on to ensure it wont leak.. (i have a small leak but realized it was the axle seal..)
But i put it back together like it came apart. Didnt touch anything else.
But now... this is kinda hard to explain. but.
Its really hard to get into gear. And say im rolling backwards a lil bit. and i put it in first gear the car will stop rolling. Its like something is binding.
Any one ever run into this problem?
Yes i did bleed the clutch Numerous times and done right.
#2
Honda-Tech Member
Thread Starter
Re: Tranny issues.. (brent_G)
Well ive tried most everything.. Im prolly gonna rip down the tranny soon. Could a bad clutch do this?
Im thinking it might be shifter forks or something.. who knows.
Im thinking it might be shifter forks or something.. who knows.
Thread
Thread Starter
Forum
Replies
Last Post