Notices
Honda Civic / Del Sol (1992 - 2000) EG/EH/EJ/EK/EM1 Discussion

Tomorrow looks like it's gonna be a "Labor" day...

Thread Tools
 
Search this Thread
 
Old 08-31-2008, 04:49 PM
  #1  
Honda-Tech Member
Thread Starter
 
EX-T's Avatar
 
Join Date: Jul 2003
Location: Murfreesboro, TN
Posts: 4,315
Likes: 0
Received 1 Like on 1 Post
Default Tomorrow looks like it's gonna be a "Labor" day...

This thread is for people to post telling about the kind of Labor they'll be doing to their cars or whatever on the Labor Day holiday...


Here is my rundown and plans for tomorrow...

Well, I have a built Crower/Vitara/Eagle D16Y8. It's been built now for about a year and I still haven't had the chance to get her purrin' like she should.

It's had a sparatic idle problem and I've been too lazy to install the 550s and 2.5 bar map sensor, so....

Tomorrow I'm going to be doing a little work on her on the lovely Labor Day holiday.

-Clean out the IACV
-Install the new TPS
-Play COD4 on the 360 or SoCom beta test on the PS3
-Install the 550cc injectors
-Install the 2.5 bar map sensor
-Play COD4 on the 360 or SoCom beta test on the PS3
-Install the chipped p28 ecu
-Bolt down my 10w7 in my trunk
-Play COD4 on the 360 or SoCom beta test on the PS3
-Clean out the interior
-Cut out the bumper so the whole front mount is exposed to air
-Play COD4 on the 360 or SoCom beta test on the PS3
-Fix the fender
-Install the carbon fiber eyebrows
-Play COD4 on the 360 or SoCom beta test on the PS3

Depending on how all this goes, I may even finish up the wategate dump tube to dump out the side of the front bumper...

So wish me luck.

NOTE: I went 104 and 63 on Shipment today! WoW that was fun!

Oh wait! I just remembered that the Beta test for SoCom starts tomorrow! I might be substituting COD4 for that some tomorrow
Old 08-31-2008, 05:03 PM
  #2  
Resident Gearhead
iTrader: (1)
 
BryanM.'s Avatar
 
Join Date: Aug 2007
Posts: 5,633
Received 10 Likes on 9 Posts
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (EX-T)

LOL @ SoCom

After I go fishing with the pops, I'm going to finish installing the black vynil interior from my retired EH2 into my new EH2 project (I hate gray interior).

I've dubbed it "Project No Rust"
Old 08-31-2008, 05:06 PM
  #3  
Honda-Tech Member
 
lluks_844's Avatar
 
Join Date: Jan 2007
Location: nowhere, ny\nj, usa
Posts: 644
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (mcvtec)

Finish a swap in a EK, clean up the garage cuz its a disaster. Than im going to finish my power window conversion. OH yeah and
Old 08-31-2008, 05:09 PM
  #4  
Honda-Tech Member
 
JKov240's Avatar
 
Join Date: May 2006
Location: TX, USA
Posts: 1,783
Likes: 0
Received 1 Like on 1 Post
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (lluks_844)

Either evacuating really early or enduring a hurricane.
Old 08-31-2008, 05:44 PM
  #5  
Honda-Tech Member
Thread Starter
 
EX-T's Avatar
 
Join Date: Jul 2003
Location: Murfreesboro, TN
Posts: 4,315
Likes: 0
Received 1 Like on 1 Post
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (JKov240)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKov240 &raquo;</TD></TR><TR><TD CLASS="quote">Either evacuating really early or enduring a hurricane. </TD></TR></TABLE>

I'd get the hell out of there if I were you!
Old 08-31-2008, 06:22 PM
  #6  
Honda-Tech Member
 
JKov240's Avatar
 
Join Date: May 2006
Location: TX, USA
Posts: 1,783
Likes: 0
Received 1 Like on 1 Post
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (EX-T)

I already tried...haha. I left my house last night at 8 and went 40 miles in 2 hours before I said f it and came back home. If it wasn't for my left knee I would've made the trip to Waco (about 4 hours or so away), but I had knee surgery 2 years ago and driving a 5-speed wasn't the best thing.

Hopefully it stays on its current course and we stay on the "good" side of the hurricane, but we're ready for anything.
Old 08-31-2008, 06:35 PM
  #7  
Junior Member
 
blkegcoupe's Avatar
 
Join Date: Mar 2008
Location: ....................................................................................................
Posts: 511
Likes: 0
Received 0 Likes on 0 Posts
Default

well i fixed my heat today and would like like a new air mix cable from honda but does anyone know if they are closed? also tommorow im cleaning out my blower motor in the car and changing the bezel to a non cracked one then finish some stuff that never gets done hey Jkov GL hiding out that f' in hurricane
Old 08-31-2008, 06:37 PM
  #8  
* B A N N E D *
 
ReactioN's Avatar
 
Join Date: Feb 2008
Location: DoSe iT MaTTeR, CA, US
Posts: 834
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (blkegcoupe)

SOCOM is gunna SUCK!!!

ive played since day 1 of socom 1 and it was the greatest til S:CA came out then it all went to hell!!! BTW online Only!

But ill be taking out the blown motor and posting is for sale and looking for stuf to go back to Single cam slam
Old 08-31-2008, 06:44 PM
  #9  
Honda-Tech Member
 
JKov240's Avatar
 
Join Date: May 2006
Location: TX, USA
Posts: 1,783
Likes: 0
Received 1 Like on 1 Post
Default Re: (blkegcoupe)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blkegcoupe &raquo;</TD></TR><TR><TD CLASS="quote">hey Jkov GL hiding out that f' in hurricane </TD></TR></TABLE>

Thanks man, hopefully we can just ride it out...I hate car rides and I don't have the money to toss around for it.

Old 08-31-2008, 07:47 PM
  #10  
Junior Member
 
1988_96hb's Avatar
 
Join Date: Oct 2006
Location: Fort Worth, Tx, US
Posts: 384
Likes: 0
Received 0 Likes on 0 Posts
Default

ill get to clean out the shed full of car parts and see if i can figure out why my poormans r swap isnt starting.
Old 09-01-2008, 03:50 AM
  #11  
B*a*n*n*e*d
 
i drive a honda's Avatar
 
Join Date: May 2008
Location: ca
Posts: 849
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (EX-T)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EX-T &raquo;</TD></TR><TR><TD CLASS="quote">This thread is for people to post telling about the kind of Labor they'll be doing to their cars or whatever on the Labor Day holiday...


Here is my rundown and plans for tomorrow...

Well, I have a built Crower/Vitara/Eagle D16Y8. It's been built now for about a year and I still haven't had the chance to get her purrin' like she should.

It's had a sparatic idle problem and I've been too lazy to install the 550s and 2.5 bar map sensor, so....

Tomorrow I'm going to be doing a little work on her on the lovely Labor Day holiday.


-Play COD4 on the 360 or SoCom beta test on the PS3
-Play COD4 on the 360 or SoCom beta test on the PS3
-Play COD4 on the 360 or SoCom beta test on the PS3
-Play COD4 on the 360 or SoCom beta test on the PS3
-Play COD4 on the 360 or SoCom beta test on the PS3

Depending on how all this goes, I may even finish up the wategate dump tube to dump out the side of the front bumper...

So wish me luck.

NOTE: I went 104 and 63 on Shipment today! WoW that was fun!

Oh wait! I just remembered that the Beta test for SoCom starts tomorrow! I might be substituting COD4 for that some tomorrow </TD></TR></TABLE>

fixed
Old 09-01-2008, 06:36 AM
  #12  
Honda-Tech Member
 
JdelMsolG's Avatar
 
Join Date: Jun 2006
Location: Brunswick, GA, u.s
Posts: 879
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (i drive a honda)

i've gotta get tires mounted and balanced and get ahold of Velocity Trends.

They gotta come get my ****, im frusterated with my car and this one day off a week **** just isnt cutting it.

I've been getting to work for the past 2 months without my car, and its a pain in the ***.
Old 09-01-2008, 06:42 AM
  #13  
Honda-Tech Member
 
Syndacate's Avatar
 
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes on 2 Posts
Default

**** man.

"Rochester Institute of Technology is a private institution blah blah blah blah we don't give a [freak] about labor day, and don't need to."

I have classes at 1-2:20, then 4-8.

Blah.
Old 09-01-2008, 06:46 AM
  #14  
Honda-Tech Member
 
SDHonda153's Avatar
 
Join Date: Sep 2004
Location: Illinois
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Syndacate)

I know what its like Syndacate, I'd probably be doing something to mine as well if I weren't stuck here at work from 7 to 7
Old 09-01-2008, 06:48 AM
  #15  
Honda-Tech Member
 
GYChris's Avatar
 
Join Date: Feb 2007
Location: Jacksonville, FL
Posts: 533
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Syndacate)

My labor for today was doing alignments at Goodyear for 2 hours then going home "sick" Goodyear is so money hungry, won't even close on Labor day
Old 09-01-2008, 06:52 AM
  #16  
Honda-Tech Member
 
Syndacate's Avatar
 
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes on 2 Posts
Default Re: (SDHonda153)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SDHonda153 &raquo;</TD></TR><TR><TD CLASS="quote">I know what its like Syndacate, I'd probably be doing something to mine as well if I weren't stuck here at work from 7 to 7 </TD></TR></TABLE>



Not to mention I just put an assload into it.

4 new KYB struts and changed it from a 2 to a 2.5" drop on Tokico springs. I might start buying turbo parts soon .

EDIT:
And I just bought a new timing belt kit and recently installed.

I knew something else burned a small hole in my pocket recently .
Old 09-01-2008, 08:11 AM
  #17  
Honda-Tech Member
 
SDHonda153's Avatar
 
Join Date: Sep 2004
Location: Illinois
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Default Re: (Syndacate)

Same here, finally got my turbo setup on and running a month and a half ago after about two years of saving up and piecing it all together. There's still some more fine tuning I could be doing on this nice day, cause it would be calling for thunderstorms on my next two days off ... lol
Old 09-01-2008, 08:17 AM
  #18  
Honda-Tech Member
 
Hanmin's Avatar
 
Join Date: Apr 2006
Location: kansas, Nevada, ohio
Posts: 1,663
Likes: 0
Received 1 Like on 1 Post
Default

Wire up my speakers, they were cut at the doors when i got the car, So ill just wire in the backs, because their not cut. I hate driving without music, then probably get my heater working, for awhile I bypassed the heater because I didn't have it in. And winter is starting so yeah.... Oh yeah, and find my long lost deck.....
Old 09-01-2008, 08:51 AM
  #19  
Honda-Tech Member
 
blaze2010's Avatar
 
Join Date: Aug 2008
Location: monroe, wa, US
Posts: 40
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (lluks_844)

sounds like a lot of fun...

Start pullin CTR motor and preping freinds car for paint... joy
Old 09-02-2008, 04:40 AM
  #20  
Honda-Tech Member
Thread Starter
 
EX-T's Avatar
 
Join Date: Jul 2003
Location: Murfreesboro, TN
Posts: 4,315
Likes: 0
Received 1 Like on 1 Post
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (i drive a honda)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by i drive a honda &raquo;</TD></TR><TR><TD CLASS="quote">

fixed</TD></TR></TABLE>

That's what ended up happening, I played COD4 all day with a little Gears of War mixed in...the beta test didn't start yesterday for some reason....
Old 09-02-2008, 08:08 AM
  #21  
Honda-Tech Member
 
Syndacate's Avatar
 
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes on 2 Posts
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (EX-T)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EX-T &raquo;</TD></TR><TR><TD CLASS="quote">

That's what ended up happening, I played COD4 all day with a little Gears of War mixed in...the beta test didn't start yesterday for some reason....</TD></TR></TABLE>

I don't get it, why is everybody mentioning beta testing COD4 and gears of war?

Both have been out for god knows how long.

I've been tryin to sell my un-opened COD4 for 360, but to no avail .
Old 09-02-2008, 08:11 AM
  #22  
B*a*n*n*e*d
 
i drive a honda's Avatar
 
Join Date: May 2008
Location: ca
Posts: 849
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (Syndacate)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Syndacate &raquo;</TD></TR><TR><TD CLASS="quote">

I don't get it, why is everybody mentioning beta testing COD4 and gears of war?

Both have been out for god knows how long.

I've been tryin to sell my un-opened COD4 for 360, but to no avail .</TD></TR></TABLE>

pro-tip

gears of war
call of duty 4

and socom are 3 different games
Old 09-02-2008, 09:35 AM
  #23  
Honda-Tech Member
Thread Starter
 
EX-T's Avatar
 
Join Date: Jul 2003
Location: Murfreesboro, TN
Posts: 4,315
Likes: 0
Received 1 Like on 1 Post
Default Re: Tomorrow looks like it's gonna be a "Labor" day... (Syndacate)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Syndacate &raquo;</TD></TR><TR><TD CLASS="quote">

I don't get it, why is everybody mentioning beta testing COD4 and gears of war?

Both have been out for god knows how long.

I've been tryin to sell my un-opened COD4 for 360, but to no avail .</TD></TR></TABLE>

The beta test is for SoCom Confrontation.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Civiclx
Forced Induction
4
11-27-2007 06:32 AM
Astig
Forced Induction
4
03-27-2007 06:55 PM
eag36
Forced Induction
10
04-06-2005 05:56 AM
Btothe3rdDegree
Forced Induction
9
08-03-2004 11:35 AM
jdmspoonitr
Acura Integra Type-R
12
11-22-2002 09:23 AM



Quick Reply: Tomorrow looks like it's gonna be a "Labor" day...



All times are GMT -8. The time now is 06:11 AM.