tein s techs...
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: Moreno Valley, CA, USA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
tein s techs...
is 150 shipped a good price for these springs??
and are they even a good set or is there something better out there other than coilovers??
and are they even a good set or is there something better out there other than coilovers??
#2
Junior Member
Join Date: Apr 2003
Location: San Diego, Ca, USA
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
Re: tein s techs... (christiantequila)
thats how much i purchased mine on ebay 2 years ago for my ek hatch. i hate them. the drop was like 1.2" and i like my cars slammed. so i bought skunk2 sleeves...put those in and sold my tech s. i mean if u like that spring drop then why not? what car do you have? its mostly based on your opinon on how low your car goes.....
but besides that the ride was cool but too high. right now my hatch is 3 1/2 inches baby. hahaahha
but besides that the ride was cool but too high. right now my hatch is 3 1/2 inches baby. hahaahha
#3
Junior Member
Thread Starter
Join Date: May 2007
Location: Moreno Valley, CA, USA
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Re: tein s techs... (wtfitzphat)
hahah 3.5 is a mean *** drop.. im just looking for a lower look. not to low though. how did it ride w/ s techs?
#6
Re: tein s techs... (christiantequila)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by christiantequila »</TD></TR><TR><TD CLASS="quote">hahah 3.5 is a mean *** drop.. im just looking for a lower look. not to low though. how did it ride w/ s techs?</TD></TR></TABLE>
check the suspension section and look for tein s. techs. i posted a picture of my car with s. techs on...next to my sister's car...with stock springs on. or search all the posts i've posted...its not much...so it'll be easy to find. as for the drop...its not low and its not noticeable to the average person...but i noticed it. it leaves about .75" of gap between the fender and the wheel. as for the ride...its like stock
check the suspension section and look for tein s. techs. i posted a picture of my car with s. techs on...next to my sister's car...with stock springs on. or search all the posts i've posted...its not much...so it'll be easy to find. as for the drop...its not low and its not noticeable to the average person...but i noticed it. it leaves about .75" of gap between the fender and the wheel. as for the ride...its like stock
Trending Topics
#8
Re: (EK_B)
the ride on the s.techs is great and you will hear that from just about everybody but the drop is something i wouldnt be able to stand for even a couple days lol i need 2 inches or better
#10
Re: tein s techs... (Agent_EM1)
from the first time i bought H&R springs i have never bought another set of lowering springs i've had a bout 4 pairs all on different cars... now i just have 1 piece suspension but trust if i was to go back to spring/strut combo first thing i would buy is H&R race springs
#12
Honda-Tech Member
Re: tein s techs... (wtfitzphat)
buy struts. i thought i'd be safe with stocks, but even though it's only a 1.9" drop in the front, front drivers strut was gone in about a month and a half. i like the ride height to be honest. i have illuminas on there now with them and the ride is amazing. and that's about what i paid for them too.
Modified by wudini at 3:13 AM 3/7/2008
Modified by wudini at 8:47 PM 3/7/2008
Modified by wudini at 3:13 AM 3/7/2008
Modified by wudini at 8:47 PM 3/7/2008
#13
Honda-Tech Member
Join Date: Feb 2007
Location: Tucson, AZ, USA
Posts: 1,518
Likes: 0
Received 0 Likes
on
0 Posts
Re: tein s techs... (wtfitzphat)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wtfitzphat »</TD></TR><TR><TD CLASS="quote">the ride on the s.techs were not bad....well reason for it is b/c its almost stock height!
</TD></TR></TABLE>
haha
</TD></TR></TABLE>
haha
#14
Honda-Tech Member
Join Date: Feb 2008
Location: CA, USA
Posts: 450
Likes: 0
Received 0 Likes
on
0 Posts
Re: tein s techs... (EK_B)
The s-tech does seem a bit high. Sorrie for a newbish question but what do you mean by shock going out?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wudini »</TD></TR><TR><TD CLASS="quote">buy struts. i thought i'd be safe with stocks, but even though it's only a 1.9" drop in the front, front drivers strut was gone in about a month and a half. i like ride height to be honest. i have illuminas on there now with them and the ride is amazing. and that's about what i paid for them too.
Modified by wudini at 3:13 AM 3/7/2008</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wudini »</TD></TR><TR><TD CLASS="quote">buy struts. i thought i'd be safe with stocks, but even though it's only a 1.9" drop in the front, front drivers strut was gone in about a month and a half. i like ride height to be honest. i have illuminas on there now with them and the ride is amazing. and that's about what i paid for them too.
Modified by wudini at 3:13 AM 3/7/2008</TD></TR></TABLE>
#15
Former Moderator
Re: tein s techs... (dohcem1)
IMO Tein S-Techs are one of the best springs for daily driven cars that you don't care to slam.
I owned a set and loved them when paired with new KYB GR-2 shocks.
I can't complain about them at all - I didn't expect a huge drop out of them.
I owned a set and loved them when paired with new KYB GR-2 shocks.
I can't complain about them at all - I didn't expect a huge drop out of them.
#16
Honda-Tech Member
Re: tein s techs... (dohcem1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcem1 »</TD></TR><TR><TD CLASS="quote">The s-tech does seem a bit high. Sorrie for a newbish question but what do you mean by shock going out?
</TD></TR></TABLE>
i mean the strut blew. it was no longer absorbing bumps, my wheel bounced like a basketball. and don't let everyone peer pressure you into slamming your ride, for a daily driver it's not worth it. the ride is almost always awful/bouncy due to spring rate and you'll be scraping all the time. s-techs give a nice stance and 100% daily drivability. my $.02
</TD></TR></TABLE>
i mean the strut blew. it was no longer absorbing bumps, my wheel bounced like a basketball. and don't let everyone peer pressure you into slamming your ride, for a daily driver it's not worth it. the ride is almost always awful/bouncy due to spring rate and you'll be scraping all the time. s-techs give a nice stance and 100% daily drivability. my $.02
#18
H-T White Ops
That's my red coupe shown above. I'm still on stock struts and have been the entire time I've had the S-Techs, which is somewhere between two and three years. I've never had a problem.
Most other springs are too bouncy and rough for my tastes. Eran's car is just .75 inches lower than mine and his scrapes as long as there is more than one person in the car (and this is with recent CTR exhaust). With an aftermarket exhaust he scraped a lot more often.
I just don't see the point in ruining my car just so it "looks nice". Then again, I don't think it looks any nicer and lower.
Take into consideration the local roads too. Most of the roads around here are nice and smooth, but I go over speedbumps all the time. There are certain parking lots that I just can't get into even at this height.
Most other springs are too bouncy and rough for my tastes. Eran's car is just .75 inches lower than mine and his scrapes as long as there is more than one person in the car (and this is with recent CTR exhaust). With an aftermarket exhaust he scraped a lot more often.
I just don't see the point in ruining my car just so it "looks nice". Then again, I don't think it looks any nicer and lower.
Take into consideration the local roads too. Most of the roads around here are nice and smooth, but I go over speedbumps all the time. There are certain parking lots that I just can't get into even at this height.
#20
Junior Member
Join Date: Jul 2007
Location: Chicago, IL
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jasony0630)
can someone please post some more pic examples of the s-techs preferably on an eg/ek hatch. i've been looking into new springs for a decent drop that doesnt look stock and has a nice ride in not so nice roads.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NOFX »</TD></TR><TR><TD CLASS="quote">That's my red coupe shown above. I'm still on stock struts and have been the entire time I've had the S-Techs, which is somewhere between two and three years. I've never had a problem.</TD></TR></TABLE>
I am thinking of keeping my stock struts as well on my 94 hatch. what else do i need to complete the drop on my car besides the springs? a camber kit? thanks
Modified by mizzoEG at 6:30 AM 4/9/2008
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NOFX »</TD></TR><TR><TD CLASS="quote">That's my red coupe shown above. I'm still on stock struts and have been the entire time I've had the S-Techs, which is somewhere between two and three years. I've never had a problem.</TD></TR></TABLE>
I am thinking of keeping my stock struts as well on my 94 hatch. what else do i need to complete the drop on my car besides the springs? a camber kit? thanks
Modified by mizzoEG at 6:30 AM 4/9/2008
#21
Re: (mizzoEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mizzoEG »</TD></TR><TR><TD CLASS="quote">
I am thinking of keeping my stock struts as well on my 94 hatch. what else do i need to complete the drop on my car besides the springs? a camber kit? thanks</TD></TR></TABLE>
thats pretty much it. no camber kit needed cause it doesnt even camber that bad. just make sure you get an alignment. i still need to get mine aligned.
I am thinking of keeping my stock struts as well on my 94 hatch. what else do i need to complete the drop on my car besides the springs? a camber kit? thanks</TD></TR></TABLE>
thats pretty much it. no camber kit needed cause it doesnt even camber that bad. just make sure you get an alignment. i still need to get mine aligned.
#22
Honda-Tech Member
Join Date: Oct 2007
Location: Northeast TN
Posts: 1,367
Likes: 0
Received 0 Likes
on
0 Posts
Re: tein s techs... (christiantequila)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by christiantequila »</TD></TR><TR><TD CLASS="quote">hahah 3.5 is a mean *** drop.. im just looking for a lower look. not to low though. how did it ride w/ s techs?</TD></TR></TABLE>
i have s techs on both of my hatches...they ride better than the stock springs. it looks conservative but still looks good and they ride great. i love the way they ride. i recommend them...unless you are really tryin to lower your car. they only lower an eg by like 1.5 in the front and 1.4 in the rear i think. great springs!!
i have s techs on both of my hatches...they ride better than the stock springs. it looks conservative but still looks good and they ride great. i love the way they ride. i recommend them...unless you are really tryin to lower your car. they only lower an eg by like 1.5 in the front and 1.4 in the rear i think. great springs!!