Taking offers on built swap details inside
#1
Thread Starter
Join Date: Feb 2002
Location: Mesa, Az, US
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Taking offers on built swap details inside
I put this on ebay...didnt sell, it has 0 miles on it since rebuild.....hasnt even been started. anyway...
http://cgi.ebay.com/ebaymotors/ws/eB...858059764&rd=1
Post offers....need to payoff my 2khatch! Thanks
http://cgi.ebay.com/ebaymotors/ws/eB...858059764&rd=1
Post offers....need to payoff my 2khatch! Thanks
#4
Thread Starter
Join Date: Feb 2002
Location: Mesa, Az, US
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
Re: Taking offers on built swap details inside (kwik2nec)
yo only get 10hp per 1 point of compression, so compression was raised from 10.0:1(Stock del sol pistons) to 10.4:1(CTR pistons) not much HP difference but a built bottom end with good compression meeting a nice top end makes more power than that of a motor with a stock bottom end. plus with this swap your gonna see longgevity....prolly last you 200k miles since its a brand new motor. maybe 170hp to the flywheel but thats guessing :/
#7
Honda-Tech Member
iTrader: (2)
Join Date: Dec 2001
Location: Phoenix
Posts: 6,494
Likes: 0
Received 0 Likes
on
0 Posts
Re: Taking offers on built swap details inside (fowler)
ctr pistons in a b16 will probably net you around 11.0:1 compression.
Jason is legit, so is the motor
Thread
Thread Starter
Forum
Replies
Last Post
EF8KiLLaBeE
All Motor / Naturally Aspirated
11
12-28-2005 06:08 AM
Veil_Side_
Honda Accord (1990 - 2002)
1
02-14-2002 02:24 PM