jus_spooln_wicha

i just aquired an automatic p28 ecu, and im trying to convert it to manual.. the logic that im using is comparison.. i have a manual p28 that ive been comparing resisters and deciding wich ones need to be removed from the automatic board..

both boards are identical... the only difference is the automatic has bout 10 or so more resistors .. HAS any one ever done this? of am i going in the wrong path?
any suggestions or comments are open..

Relic1

remove RP17 and RP18, place a jumper across RP18.
that's all that needs to be done.

jus_spooln_wicha

damn .. thats alot easier then what i did.. now knowing that im a little scared that i fuked it up...lol woops.. cuz i litterally cut out the resisters that were on A/T BOARD .. to look identical to the M/T BOARD..

jus_spooln_wicha

i guess thats what cha get for not researching first..

Relic1

the resistors that you cut out will not matter, you simply didn't have to do it.

jus_spooln_wicha

.. thank you for all the info, uve been alot of help !!

instrument

wow
a search on google would've had you the answer
but instead you just went cutting
nice!

jus_spooln_wicha

yep it woulda been that easy ..but fortunetly i dont have a computer.. right now.. is a luxary..