swapping the icm and igntion coil out of a b16
02-19-2006, 05:33 PM
#1
Member
Thread Starter
Join Date: May 2003
Location: out in the farms, nj, USA
Posts: 2,980
Likes: 0
Received 0 Likes
on
0 Posts
swapping the icm and igntion coil out of a b16
sup guys i just gutted a z6 dist and soon as you pull off the dist cap you got a plastic cap covering everything.. Im not talking about the dist cap its the cap under it.. well i broke the z6 cap off but i dont wanna screw up my b16 dist. I see the phillips screw to undo the rotor but i dont know how to get this shield off without breakin something. Im sure im not the 1st but please help me out 
and you cant undo the rotor without this cap coming off first
and you cant undo the rotor without this cap coming off first
02-19-2006, 05:39 PM
#2
Join Date: Dec 2005
Location: Virginia Beach, Va, Usa
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
ummmm take the dizzy off the car and spin the rotor until you can get to it with a screwdriver... if you still cant get it ... break off the cover... i have rebuilt over 50 dizzys and never put them back in
Thread
Thread Starter
Forum
Replies
Last Post
lmike6453
Acura Integra
16
02-22-2008 07:34 PM
Unjockable
Honda Civic / Del Sol (1992 - 2000)
20
02-15-2004 03:49 PM
