Swap Wiring Question
10-20-2014, 08:22 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2014
Location: Texas
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Swap Wiring Question
About to swap my gsr into my 4dr eg.
My main question is the EG is auto and my del sol was also but i swapped that around about 8 years ago and cant remember the wiring portion of the swap. I have an OBD1 gsr engine harness P72 ecu so all that should be good to go.
But the the large plug in the center console area. I dont care for the clutch safety part i push the clutch in every time anyways when i start. Less wiring, less problems. I remember a DIY of just cutting the whole harness and splicing 2 of the wires together and it forgets it was ever automatic. If anyone remembers this please let me know.
My main question is the EG is auto and my del sol was also but i swapped that around about 8 years ago and cant remember the wiring portion of the swap. I have an OBD1 gsr engine harness P72 ecu so all that should be good to go.
But the the large plug in the center console area. I dont care for the clutch safety part i push the clutch in every time anyways when i start. Less wiring, less problems. I remember a DIY of just cutting the whole harness and splicing 2 of the wires together and it forgets it was ever automatic. If anyone remembers this please let me know.
Thread
Thread Starter
Forum
Replies
Last Post