patotas

ok, so i have a crashed ej with a b20, vtec with gsr tranny, and i just got a ek shell and i was wondering on what parts would fit the ek, and what parts would i need in order to perform the swap,

btw, the ek now has a d16y8 in it.

thanks,

Adankid

i believe the 99-00 si mounts and brackets.

patotas

you mean just engine mounts ? what about axels,

patotas

bump for help..

aguitarmanyac

You'll need the 99-00 rear engine mount from an si, and I think a left engine mount from the 94-97 del sol vtec b16 motor. You'll need the axels from the engine and possibly wire swaps.

*supersonic*

the axels work from eg to ek.

*supersonic*

sorry to differ on your answer aguitarmany, but you will not need the rear off 96-00 mounts, because the one you have should work fine, youll only need the side mounts both of them from a 99-00 B series...

take a look for your self, all you need for your swap...compare

EK = http://hasport.com/shop/index.php?cPath=32_35

EG = http://hasport.com/shop/index.php?cPath=27_28

*supersonic*

I happen to be selling a brand new set of Hasport motor mounts for EK 96-00 for your swap let me know if your interested...im doing the opposite of you lol...from EK to EG

patotas

where you located ?, and do you know if the single cam shift linkage will work, or do i have to switch that too ?

*supersonic*

Im located in CT and willing to ship if necessary...and know i believe they dont fit, but you said you had a b20 on a EG souldnt you already have the shift linkage?