mycvc8u2

how early is it to engage vtec in a d16y8??

SICKSOLSI

do you mean when it crosses over into vtec?

mycvc8u2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95excoupeMT &raquo;</TD></TR><TR><TD CLASS="quote">do you mean when it crosses over into vtec?</TD></TR></TABLE>

yes

EX-T

roughly 5600 rpm...get a short ram intake and you can hear it.....

mycvc8u2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DSeriesBKilla &raquo;</TD></TR><TR><TD CLASS="quote">roughly 5600 rpm...get a short ram intake and you can hear it.....</TD></TR></TABLE>
you,re kidding right?? that's a stock setting.. i am asking for when i install my vtec controller this week. what is too low, not what is the stock setting j/k

thanks anyways

viprcr1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mycvc8u2 &raquo;</TD></TR><TR><TD CLASS="quote">
you,re kidding right?? that's a stock setting.. i am asking for when i install my vtec controller this week. what is too low, not what is the stock setting j/k

thanks anyways </TD></TR></TABLE>


well why dont you speak in english next time so people can understand what the **** your talking about

grey_ek

3000 rpm is too low, set it to 4400 rpm.

mycvc8u2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by viprcr1 &raquo;</TD></TR><TR><TD CLASS="quote">


well why dont you speak in english next time so people can understand what the **** your talking about </TD></TR></TABLE>

you are 100% *******...and i am NOT kidding

there is no room for ******** like you here on H-T.. ****** moron

mycvc8u2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by viprcr1 &raquo;</TD></TR><TR><TD CLASS="quote">


well why dont you speak in english next time so people can understand what the **** your talking about </TD></TR></TABLE>

i apologize to anyone else here if my question was vague, but there are other ways of telling people that without being ignorant..

mycvc8u2

thanks gray_ek-that's more or less what i was thinking.

mycvc8u2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by viprcr1 &raquo;</TD></TR><TR><TD CLASS="quote">


well why dont you speak in english next time so people can understand what the **** your talking about </TD></TR></TABLE>

u have pm

Evs-One

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mycvc8u2 &raquo;</TD></TR><TR><TD CLASS="quote">

you are 100% *******...and i am NOT kidding

there is no room for ******** like you here on H-T.. ****** moron </TD></TR></TABLE>

well if your question was clearly stated, maybe you would get better replies.


And quit trying to up your post count. You responded 4 times in a row, when you could have edited, quoting the same reply twice

No wonder you're at 96%

EDIT - You quoted the same reply THREE times....

mycvc8u2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Emerika &raquo;</TD></TR><TR><TD CLASS="quote">

well if your question was clearly stated, maybe you would get better replies.


And quit trying to up your post count. You responded 4 times in a row, when you could have edited, quoting the same reply twice

No wonder you're at 96%

EDIT - You quoted the same reply THREE times.... </TD></TR></TABLE>

why does everyone give a **** about what's not important.. i agree that my initial statement was vague and i apologized, don't come in here acting like you're somebody or a moderator. yes i quoted more than once, my bad, i got caught up in the moment.. and so far only 2 people have answered the original question.. i just wanted my question answered and advice.. just cause you are behind that keyboard doesn't give you a right to act like that.. if i was there in your face, believe me you wouldn't be talking like that.. just answer the question and be polite.. jesus ****** h christ.. why does everyone have to be an *******.. damn

Evs-One

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mycvc8u2 &raquo;</TD></TR><TR><TD CLASS="quote">

why does everyone give a **** about what's not important.. i agree that my initial statement was vague and i apologized, don't come in here acting like you're somebody or a moderator. yes i quoted more than once, my bad, i got caught up in the moment.. and so far only 2 people have answered the original question.. i just wanted my question answered and advice.. just cause you are behind that keyboard doesn't give you a right to act like that.. if i was there in your face, believe me you wouldn't be talking like that.. just answer the question and be polite.. jesus ****** h christ.. why does everyone have to be an *******.. damn </TD></TR></TABLE>


excuse me??? ummm......just STFU please.

PMed you with a good enough answer to your "question".

2000blackgsr

What have you done to the motor..that will be a better indication of when to set the vtec crossover.

thid92

dyno is ur answer, from there u can see where the best point of engagement is

mycvc8u2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96coupe &raquo;</TD></TR><TR><TD CLASS="quote">What have you done to the motor..that will be a better indication of when to set the vtec crossover.</TD></TR></TABLE>
d16y8 in 93 hb
y7 bottom end/y8 headgasket
type r aem cai
dc header
hp catback
64mm bored itr tb
clutchmasters flywheel~9lb
act clutch

zex 59300 and cam gear going in wednesday
vtec controller shortly after that..

hatchback19

Honda put the crossover point there for a reason, It's not just a random number. Stock is always the best. There's been debate over this number before. I wouldn't lower it too much, I wouldn't go below 4900 personally.

MrIllegalX

Not to start an argument, but, on my HX the VTEC engagment is around 4,500 and redline is at 6,800.

Many people feel that the only way to change the vtec point of engagment is if you have serious modifications done to your car and your fuel/air ratio is significantly different. Honda techs. spent many hours figuring that out and it shouldn't be messed with unless you have access to a dyno and you can figure it out from there. I've heard everything from "VTEC controllers didn't help my car at all" to "my vtec controller took a second off my 1/4 mile time."

Your choice. Dyno and tune. Tuners these days have forgetten the critical nature of tuning.

mycvc8u2

thanks hatchback19! i will keep that in mind

mrillegalx-cool why 6800 redline? is that the factory redline on a hx? j/c

MrIllegalX

Yes, that's factory redline.

infinatenexus

Just leave it stock,, where Honda put it.

Audi RS4

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Emerika &raquo;</TD></TR><TR><TD CLASS="quote">

well if your question was clearly stated, maybe you would get better replies.


And quit trying to up your post count. You responded 4 times in a row, when you could have edited, quoting the same reply twice

No wonder you're at 96%

EDIT - You quoted the same reply THREE times.... </TD></TR></TABLE>

hehe

COMplex.

this thread made me laugh. i agree, i wasnt sure if the question was english or not.

and one word, DYNO

jdmsiR20

dyno sounds good

but also, keep in mind that the vtec crossover should be reasonable, with correct oil pressure, and enough fuel too