stock intake questions
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2007
Location: PDX, OR
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
stock intake questions
ok so i recently bought a stock air intake to replace my crappy ebay special intake w/cone filter...
when i got the intake , it came with 5 seperate pieces and no i dont know which piece goes where....
there is this big boxy piece that i have no idea where it attaches .... anyone have a guide or pics on this to help me out?
thanks
when i got the intake , it came with 5 seperate pieces and no i dont know which piece goes where....
there is this big boxy piece that i have no idea where it attaches .... anyone have a guide or pics on this to help me out?
thanks
#2
Honda-Tech Member
Re: stock intake questions (shadohconspiracy)
Pics? And is this going on the EG in your avatar (what car)?
If it's a '92-'95 then you have have the pipe that connects the throttle body to the air box, and then the resonator that goes behind the bumper in the wheel well.
If it's a '92-'95 then you have have the pipe that connects the throttle body to the air box, and then the resonator that goes behind the bumper in the wheel well.
#4
Props on canning the Ebay intake. My EM1 came with a crappy HiperFlow and I will be replacing it with the OEM intake as well. I'm also kind of pissed that there was a plastic tie supporting the short ram from the strut bar which rubbed a bunch of paint off of the brace . Oh well, it's an excuse to repaint it.
#5
Honda-Tech Member
Re: stock intake questions (shadohconspiracy)
The pipe/box on the left connects to the throttle body, the box/pipe on the right connects to the one on the left and goes behind the bumper in the passenger wheel well.
You might have to pop the bumper off (or at least that side).
You might have to pop the bumper off (or at least that side).
Trending Topics
#8
Resident Gearhead
iTrader: (1)
Re: (EK_B)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EK_B »</TD></TR><TR><TD CLASS="quote">You'll love the low end power you will get back. </TD></TR></TABLE>
That's what I've always wondered. I have been looking for a stock (SiR/SiR-II)airbox for my EG/B16A but can't find one.
Anyone know of a place?
That's what I've always wondered. I have been looking for a stock (SiR/SiR-II)airbox for my EG/B16A but can't find one.
Anyone know of a place?
#9
Honda-Tech Member
Join Date: Jan 2006
Location: Rochester, New York -> Santa Clara, CA
Posts: 10,443
Likes: 0
Received 2 Likes
on
2 Posts
I like the way everybody disses ebay piping, meanwhile it's the same piping as AEM would use. The only thing that matters will be the filter...so ANY pipe...with a K&N or AEM filter = win, simple as that.
LoL
"You'll love the low end power you will get back"
Yeah, you'll love it almost as much as you love the restriction in air due to the smaller diameter piping.
LoL
"You'll love the low end power you will get back"
Yeah, you'll love it almost as much as you love the restriction in air due to the smaller diameter piping.
Thread
Thread Starter
Forum
Replies
Last Post
offcamber
Acura Integra
2
04-08-2008 12:22 AM
Mikizzle
Honda Civic / Del Sol (1992 - 2000)
8
02-29-2004 12:25 PM
integraautox
Acura RSX DC5 & Honda Civic EP3
4
12-22-2003 09:42 PM