Some questions about 00 Si rear disc swap to a 96 EX (read the FAQ)
11-19-2007, 08:04 PM
#1
Junior Member
Thread Starter
Some questions about 00 Si rear disc swap to a 96 EX (read the FAQ)
I have some quick questions...
How do I change the proportioning valve? Can someone link me up with a guide cause the FAQ does not mention much about it.
What are the main issues with the conversion? Frozen bolts (I have PB Blaster ready and plan to get a Propane Torch as a backup).
I currently have ABS on my EX, does that mean both front and rear? If so... do I just unhook and hook up the connectors?
I want to bleed/flush with clean new fluid, how many bottles do I need? Do I bleed it numerous time (bleed the entire brakes once, twice, etc... until its clean) or do I bleed one side until its clean, then move on until its clean, and et cetera.
I want to plan for the worst... what can I expect?
How do I change the proportioning valve? Can someone link me up with a guide cause the FAQ does not mention much about it.
What are the main issues with the conversion? Frozen bolts (I have PB Blaster ready and plan to get a Propane Torch as a backup).
I currently have ABS on my EX, does that mean both front and rear? If so... do I just unhook and hook up the connectors?
I want to bleed/flush with clean new fluid, how many bottles do I need? Do I bleed it numerous time (bleed the entire brakes once, twice, etc... until its clean) or do I bleed one side until its clean, then move on until its clean, and et cetera.
I want to plan for the worst... what can I expect?
Thread
Thread Starter
Forum
Replies
Last Post
Hatchless96
Honda Civic / Del Sol (1992 - 2000)
6
05-28-2006 10:31 AM
who00knows
Road Racing / Autocross & Time Attack
18
03-03-2003 09:26 PM
who00knows
Honda Civic / Del Sol (1992 - 2000)
8
07-14-2002 06:16 PM