92_boosted

i have seen two different ones on ebay...yea i understand the circumstances behind ebay...but can i get the good and bad behind the two that i have seen...


http://cgi.ebay.com/ebaymotors...sting

http://cgi.ebay.com/ebaymotors...sting

JMelt4

helical = quaife

quaife = best

Richard...

just get the obx LSD follow the write up that’s on honda-tech about the LSD's


Camp1320 also has good prices on these LSD's he is a honda-tech member so...

or you can get it from ebay nothing wrong with ebay just make sure you check the feedback and pay by paypal

hope this helps?

Libertariat

Just get an obx, take it apart and realign the washers. It works fine.

Square lsd FTL. Haven't seen one of those in ages.

Richard...

There you go!

You got two people on honda-tech telling you the same thing!


By the way this subject has been beaten to death over the years naturally your always going to get negative comments from the name brand hors who seem to have million-dollar pockets lol...!

However just go with the OBX i run one my self and know many people who run them with out any problems!

Mista Bone

OBX and don't open it, I installed number 16 OBX tonight, twas I who figured out the third generation changes.

Phantom Slip POS.............bastards thought they could sue me!

Richard...

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mista Bone &raquo;</TD></TR><TR><TD CLASS="quote">OBX and don't open it, I who figured out the third generation changes.
</TD></TR></TABLE>

? &gt;?

Mista Bone

towards the end of page three.........

https://honda-tech.com/zerothread?id=1962959&page=3

Richard...

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mista Bone &raquo;</TD></TR><TR><TD CLASS="quote">towards the end of page three.........

https://honda-tech.com/zerothread?id=1962959&page=3</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mista Bone &raquo;</TD></TR><TR><TD CLASS="quote">Have you gotten in the third generation SOHC LSD yet?
Proper width and more room for the bolts......
</TD></TR></TABLE>


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mista Bone &raquo;</TD></TR><TR><TD CLASS="quote">

I've seen two so far, the plastic bags are thinner. Appears they were remachined so bearing width is near stock, no creative shimming required. The one I'm installing was purchased thru Ebay, Tuning Depot, the other from Sparktec and they waited like a month!
Also the bolt heads were almost flush with the case, unlike sticking up 1/8" and hitting the case and bearing when installed.

Also would like to know if customers of mine pay for their LSD, can you ship it to me upon their request.

Thanks.

</TD></TR></TABLE>

now i understand what your talking about!

it is refreshing that OBX dose keep improving upon there design flaws!

as for

Tuning Depot

got mine from him too!

Mista Bone

OBX fixed their screwup. I had shims ready to be cut out from thin stock, lucky I was broke and held off.

They (OBX) got it right, for once.

92_boosted

yea i figured that after i posted...was in a hurry so to post another one of these same topics...but for sure ill just hit up the obx ones...who did you say sells them on here for a decent price??

Mista Bone

ERZperformance.com is his username.