Smoke Issue
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2003
Location: Clinton, TN
Posts: 704
Likes: 0
Received 0 Likes
on
0 Posts
Smoke Issue
I just finished putting my d15 back together. When I first started it up it smoked a little but went away. I cut it off and did a few things. When I started it back up it didn't smoke at all, but as soon as i gave it a little gas it started smoking again. Would you think that this could possibly be my rings?
New Valve's (Seated by professional)
New valve stem seals
New gaskets
I took it for a little drive and it didn't smoke enough that I noticed it.
Cylinder walls had a bit of surface rust that ended up coming clean very easy.
Here's a picture reference of the cylinder walls.
https://honda-tech.com/zerothread?id=2358123
New Valve's (Seated by professional)
New valve stem seals
New gaskets
I took it for a little drive and it didn't smoke enough that I noticed it.
Cylinder walls had a bit of surface rust that ended up coming clean very easy.
Here's a picture reference of the cylinder walls.
https://honda-tech.com/zerothread?id=2358123
Thread
Thread Starter
Forum
Replies
Last Post
Blopez1125
Honda Civic / Del Sol (1992 - 2000)
5
09-15-2013 08:50 PM