Skunk2 Intake Manifold
04-22-2008, 12:56 PM
#1
Thread Starter
Join Date: Mar 2008
Location: Some Worthless Town,, JDM, Japan
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
Skunk2 Intake Manifold
Is this a good Manifold? Will my AEM short ram intake fit to this? Thanx!
http://www.andysautosport.com/....html
http://www.andysautosport.com/....html
04-22-2008, 01:07 PM
#2
Member
Join Date: Mar 2004
Location: smyrna, ga, usa
Posts: 1,466
Likes: 0
Received 0 Likes
on
0 Posts
Re: Skunk2 Intake Manifold (CivicEK321)
i installed one on a friends 96 ex mini me that i built for him
the only thing that threw us is that the runners are a little longer so it sits further back.
closer to the firewall
and the factory IACV hoses were to short so... not hard just unexpected
good manifold and will work with your short ram
the only thing that threw us is that the runners are a little longer so it sits further back.
closer to the firewall
and the factory IACV hoses were to short so... not hard just unexpected
good manifold and will work with your short ram
04-22-2008, 01:56 PM
#3
Join Date: Jun 2007
Location: usa
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Re: Skunk2 Intake Manifold (95jeremie)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95jeremie »</TD></TR><TR><TD CLASS="quote">i installed one on a friends 96 ex mini me that i built for him
the only thing that threw us is that the runners are a little longer so it sits further back.
closer to the firewall
and the factory IACV hoses were to short so... not hard just unexpected
good manifold and will work with your short ram </TD></TR></TABLE> I think the skunk 2 manifold is one of the best
the only thing that threw us is that the runners are a little longer so it sits further back.
closer to the firewall
and the factory IACV hoses were to short so... not hard just unexpected
good manifold and will work with your short ram
</TD></TR></TABLE> I think the skunk 2 manifold is one of the best
Thread
Thread Starter
Forum
Replies
Last Post
gawath
Welding / Fabrication
1
08-29-2005 03:42 PM
