set cam pulley jdm d15b vtec...
#1
Junior Member
Thread Starter
Join Date: May 2002
Location: s. cali
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
set cam pulley jdm d15b vtec...
i have a jdm d15b vtec going into a 95 cx. from using the search botton i could say, d15z1 (block) + d16z6 (head)= jdm d15b vtec. Im about to change my timing belt and i was wondering how sould i set the camshaft pulley.
Modified by eh2 at 2:31 AM 12/22/2003
Modified by eh2 at 2:31 AM 12/22/2003
#3
Member
uh you should set the camshaft where the horizontal lines line up with the head, the one mark by itself lines up with the mark on the timing cover under the cam sprocket, and the up mark pointing up.
set your crankshaft AT TDC by lining up the TDC mark with the timing marks on the timing cover.
you answered your own questions with that diagram..
set your crankshaft AT TDC by lining up the TDC mark with the timing marks on the timing cover.
you answered your own questions with that diagram..
Thread
Thread Starter
Forum
Replies
Last Post
snoochtodanooch
Honda Civic / Del Sol (1992 - 2000)
6
06-08-2006 07:49 AM