S300 analog input
04-04-2009, 02:46 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: Red Deer, Alberta, Canada
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
S300 analog input
Has ayone soldered their own S300/ECU?
I purchased i p06 converted over to VTEC, and ready for an S300.
Before I install it, I want to connect the analog input so I can datalog with my AEM wideband.
I have the two 1N4148 diodes that replace r2 & r3. I can't find any info to indicate which way to install the diodes. Some places on the ECU have the arrow into a line to indicate polarity. r2/3 do not.
Suggestions...and photos are appreciated!!
I purchased i p06 converted over to VTEC, and ready for an S300.
Before I install it, I want to connect the analog input so I can datalog with my AEM wideband.
I have the two 1N4148 diodes that replace r2 & r3. I can't find any info to indicate which way to install the diodes. Some places on the ECU have the arrow into a line to indicate polarity. r2/3 do not.
Suggestions...and photos are appreciated!!
Thread
Thread Starter
Forum
Replies
Last Post
heel_touge
Engine Management and Tuning
4
05-14-2009 09:48 AM
bluetiddlywinks
Tech / Misc
3
05-03-2004 01:13 PM
