racecarpete

Why would this not work in an EG/ Honda uses the same seat bottom for almost all their seats. That is why you can just swap rails to get Teg/sol/ek/eg seats in all of the previous mentioned cars. This how to should apply to all civics/tegs/del sols, no problem. If you have any questions let me know. Later

TurboBumblBee

i did the passenger side seat in my 95 coupe or EG and it worked fine.. just follow the directions, not difficult at all, just takes time.. i dont know if i want to do the driver side yet cause the seat is higher then i would want it i think..

EB_kid

can't see the pics.. but sounds really interesting. i've been thinkin of purchasin some S2k seats for awhile but the whole idea of sittin lower doesn't really suit me. if i ever do purchase some i'm goin to try this. for the idea.

racecarpete

dunno why you can't see the pics, anyone else have this problem? If you don't want to sit lower i don't know if you should purchase these seats. They are extremely low at first but after you change the rails it does raise them up slightly but you are still low.

ej1civic

Sweet! awesome info! nice work. i would have never tried that!

icelarry27

those are some nice *** seats...how much did you pay for those...by the way, nice job gettin them in...

CLERIC

Looks Good

stevecockrill

Awesome how-2. One question......do you know if the del Sol seats share the same "metal seat part" that you swapped out? I'm looking into new seating in my del Sol and the S2000 swap looks very nice. Any ideas if I can swap the del Sol seat internals with the S2000 to make it 4 point mounting?

Cheers, and total kudos!

Steve

racecarpete

sup man, i see you are from college station, well I'm here in BCS too going to A&M, if you wanna check out how these seats feel before you buy them or just want some more info you can come out to the meet tonight at Oreily's on Texas accross from walmart and you can sit in them or ask me any questions you want. I drive a silver 2000 civic, dropped rims, yadda yadda. Well on to your question, the del sols do share the same seat bottom, so this could also be done but if i was you, i would sell the sol seats cause people love sol seats, get some junker civic seats and then do the mod. You could sell your sols if they are in good condition for a good 2-300 subtract that from 800 (going rate for s2000 seats now) and you got them for 500 bucks then buy some junk stocker civic seats, 20-50 bucks and then you got it made. later

stevecockrill

****, thats literally 1/2 a mile from my house!! What time? I get up at 4:30 am to commute to Houston

Steve

racecarpete

we meet every wednesday, 10:30 ish. I usually show bout 10:45 to 11:00. It is interesting, domestics and imports, usually there are a lot of people but don't know bout today, i think most people went home already but I'll be out if you want to come. Later

Jay-C

good post...my friend saw this on ebay today and showed it to me so i figured id pass it along (not for the ad just for the pics of the seats)

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1874464623

youngkow

Amazing!

jonnybravo

Cool, but only thing I don't like is that you have to use the civic base, it's levers, and plastice pieces. I don't think they match up very well. Any other way to put these in without doing this. How about removing the little pieces of the Civic rail that the mounting bolt goes through and weld it on to the S2000 rails? Is the lenght and width of the rails the same?

stackz

sorry to bring this back from the dead but I stumbled upon it and am amazed as I've been searching for this exact info....you say all civic pans are the same?? so I can get a junker seat out of a 4g or 5g civic for the time being to drive around on while I do this?? like it will bolt in place too?? also, this gives you FULL motion on the s2000 seats?? forward backward action?? tilt apprently?? as for driver's seat mine is the same as the passenger seat (I have no little ***** I can see?) so mine should be straight forward right??

tuphatt

Do you think this is the same concept for RSX seats. I am in Houston and trying something different. Too many peeps have S2k. They still are clean as hell...

thanks in advance.

Blue-Civic-Hybrid

iTrader: (1)

Wow, now I know how to do this, I will try it this weekend...

GoT HaTcH

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blue-Civic-Hybrid &raquo;</TD></TR><TR><TD CLASS="quote">Wow, now I know how to do this, I will try it this weekend...</TD></TR></TABLE>

whoDAT

great write up i'll be referring back to this thread as soon as i get some s2k seats.

TCLchicago1

very nicely done man..

ELUD THS

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Alcoholic &raquo;</TD></TR><TR><TD CLASS="quote">nicely done &lt;IMG NAME="icon" SRC="http://rely.net/~htimages/smile/emthup.gif" BORDER="0"&gt; </TD></TR></TABLE>

RangerDan

Awesome job.

tominos

thanks for the writeup. do you know if this applies to all honda seats?

jimmhatch

iTrader: (4)

Damn this was very well done. I'd have to go find a set of s2k seats now. Been wanting those seats for awhile. Very helpful for me.

PSU

iTrader: (2)

im glad i read where you said the seats do not recline/go foward

that sucks

cancel the red s2000 seats