sk8shorty012

iTrader: (3)

I've found a useful diagram and I know what wires to tap, however when I look at the ignition and starter wires, they are almost a 10gauge wire (real thick). I've tried using blue t-taps, but it doesn't seem to suffice as a connection. I don't want to expose the wire and solder to it, but I need to make the connection. Any ideas?

Unseen Racer

soldering is your only option.

just solder it and use a shrink tube

eskimo10

^ agreed, shrink tubing is amazing stuff.

sk8shorty012

iTrader: (3)

Actually, I ended up finding 10-12gauge quick connects. Thanks though

sk8shorty012

iTrader: (3)

BTW, just for reference here's a wiring diagram that I came up with based on electrical schematics. I found it more helpful than other because it actually applies to the 96-00 Civics:

enycesam

Nice diagram Evan.

kcjohnnyboy

nice diagram, where are you placing the push button? not many great locations to place in a 96-00 civic

sk8shorty012

iTrader: (3)

burningrex

nice! looks real clean!

Mingo

iTrader: (1)

looks clean