Which rod+main bearings?
#1
Junior Member
Thread Starter
Join Date: Jan 2005
Location: Albany, NY
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
Which rod+main bearings?
I searched, but really didn't get an answer for what I need to know. I know that Honda does their bearings by color code. But I read somewhere that aftermarket companies, like ACL and King, only use one size. I was just wondering if that's true. I found a set of ACL bearings on Ebay for a decent price, and was going to get them, but I don't want to order the wrong ones. The crank is a stock crank, and I'm only replacing the bearings because I already have the motor apart, so I figure do it the first time, and do it right. This is my first engine rebuild, and I'd be pissed if I messed it up.
#2
Honda-Tech Member
iTrader: (1)
Join Date: May 2003
Location: Street Light Garage, So Cal
Posts: 2,846
Likes: 0
Received 0 Likes
on
0 Posts
I know ACL only uses one size.. but ive heard that they are either all yellow or all green bearings, so I cant give you a deffinitive answer.
free bump for someone else who knows..
free bump for someone else who knows..
#5
Junior Member
Thread Starter
Join Date: Jan 2005
Location: Albany, NY
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
Re: (premo_si)
wow, I thought that I would have at least had someone in here to flame me for not knowing by now. Bump again to see if anyone can help.
Thread
Thread Starter
Forum
Replies
Last Post