Replaced both CV driveshafts and still clicks while turning. WTF?
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: Calgary, AB, Canada
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Replaced both CV driveshafts and still clicks while turning. WTF?
What could it possibly be? I first replaced the passenger side and the clicking went away and came back so I then I got Honda to diagnose it and they said it was the driver's side. Replaced that too and on the same day, clicking came back.
This is while turning left. It now only clicks occasionally.
This is while turning left. It now only clicks occasionally.
#2
Honda-Tech Member
Join Date: Aug 2003
Location: Greensburg, PA, USA
Posts: 1,873
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replaced both CV driveshafts and still clicks while turning. WTF? (3 G's)
was it wrecked before? your alignment may be outta whack or even frame problems... aftermarket LSD?
#6
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: Calgary, AB, Canada
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
No, my car wasn't wrecked.
No, my car isn't slammed. It's only lowered 1.5 in the front and 1.0 in the back
The axles are in all the way. Unfortunately, I do have a feeling that it's faulty rebuilt CV cause that's what it looks like it's leaning towards. Dammit.
Thanks though. If there are any other suggestions, by all means.
No, my car isn't slammed. It's only lowered 1.5 in the front and 1.0 in the back
The axles are in all the way. Unfortunately, I do have a feeling that it's faulty rebuilt CV cause that's what it looks like it's leaning towards. Dammit.
Thanks though. If there are any other suggestions, by all means.
Thread
Thread Starter
Forum
Replies
Last Post
EG civic
Tech / Misc
9
04-01-2007 09:35 AM