Rear Eg Sheetmetal
08-02-2006, 09:34 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2005
Location: New York, Ny
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Rear Eg Sheetmetal
just had a quick question...i searched on honda tech and couldnt find any info or write-ups that can help me out with this rear sheetmetal fab...heres a pic any info would be kool thanks
08-02-2006, 09:55 AM
#2
No Sales Forums
Re: Rear Eg Sheetmetal (15to1)
wow... it almost looks like you cut to much. There is no real guide line that I have seen on how to sheetmetal the rear end of a Civic. Experiance is probably the best guide. If you want the job to come out right then take your time & use the right tools for the job. Just don't cut too much out of there unless you know what you are doing....
08-02-2006, 10:15 AM
#4
Unceasing Measure
Re: (Gunmetal_B20_Hatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gunmetal_B20_Hatch »</TD></TR><TR><TD CLASS="quote">What exactly are you trying to accompish?</TD></TR></TABLE>
Heavy weight reduction for a race car, it looks like.
Heavy weight reduction for a race car, it looks like.
08-02-2006, 12:47 PM
#5
No Sales Forums
Re: (Archidictus)
It truth you are probably looking at about 20-30 lbs... In any case it is not worth it, unless you are going to do a full "back-half" on the car. Then you are pretty much trashing it...
Thread
Thread Starter
Forum
Replies
Last Post
int3gra07
Honda / Acura
3
12-16-2006 10:08 PM
