Rear Disc Brake Conversion on EJ6
08-29-2010, 07:13 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2009
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Rear Disc Brake Conversion on EJ6
I posted this question on an older thread but it was many pages down so I figured no one would get to it.
I'm trying to do a rear disc brake conversion on a 99 DX and going by what I've been able to dig up and have read so far (proportioning valve and trailing arms from all 92-00 civics are the same I think), could I use the following for a painless conversion:
DC brake calipers/rotors
DC brake lines
EM1 master cylinder
EM1 E-Brake Lines
Am I correct? If someone could confirm this I would greatly appreciate it. If there are any better or easier ways to do this, any tips would be great.
I'm trying to do a rear disc brake conversion on a 99 DX and going by what I've been able to dig up and have read so far (proportioning valve and trailing arms from all 92-00 civics are the same I think), could I use the following for a painless conversion:
DC brake calipers/rotors
DC brake lines
EM1 master cylinder
EM1 E-Brake Lines
Am I correct? If someone could confirm this I would greatly appreciate it. If there are any better or easier ways to do this, any tips would be great.
Thread
Thread Starter
Forum
Replies
Last Post
Excelerate
Honda Accord (1990 - 2002)
1
03-22-2004 01:42 PM
