IVAN93EG

i see headers for like 5 bucks plus 30$ for shipping.are they even worth looking at . they dont look too shabby. i know you get what you pay for but it almost seems too tempting for on owner on a serious budget. i see throw shifters for like a buck plus 8 for shipping.is this very poor quality stuff or what?

cranny

you said it dude , you get what you pay for. stay away from those cheap short throw shifters off ebay , ive seen 4 of em now snap right off where the threads start for your **** to screw on. happened when bangin second in all 4 cases. snap. poopie kaa kaa shifters. as far as headers goes , you can get a stainless header by OBX for prolly little pver or under 100 bucks. OBX headers are ok , by no means awsome ones but good.

IVAN93EG

what about obx intake manny.that chrome looks cool as ice but probly doesnt gain power.think a buyer could lose power from it?

-Gary-

I haven't fooled with the OBX, but I hear a lot of good stuff about them and Megan racing.

In my opinion, I think it all boils down to the construction of the headers, like the welds and the materials used. Most people **** and moan about cheap headers cracking and whatnot, but I had my DC Sports headers do the same. (YES I ALREADY KNOW DC's SUCK)

I bet the HP difference is minimal between a cheap eBay header and a $400 model for a stockish d-series.

PhatBoy5015

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cranny &raquo;</TD></TR><TR><TD CLASS="quote">you said it dude , you get what you pay for. stay away from those cheap short throw shifters off ebay , ive seen 4 of em now snap right off where the threads start for your **** to screw on. happened when bangin second in all 4 cases. snap. poopie kaa kaa shifters. as far as headers goes , you can get a stainless header by OBX for prolly little pver or under 100 bucks. OBX headers are ok , by no means awsome ones but good.</TD></TR></TABLE>
Yep, if you shift hard, they will break. My friend's broke after about 2 months. But I have had my cheap one for about 2 years with no problems. But I never shift hard either.

LowSlow93Sol

I havent had problems with my header I got from there. Good quality welds and a thick flange. Got to be carefull with Intakes and manifolds though, Some of them havent been deburred and could let a piece of metal go into the engine. I wounldn't trust any of the short shifters on there either.

sicones

I have seen and heard better things about OBX then DC sports if you ask me, i have obx headers on 2 cars goin on 4 years