CivicMexicano

ok, i just wanted to post here to see if this could be true or not...

Ok there a local guy with a 2000 Si, with turbo, suposedly his getting 312 whp and 400 lb/ft torque, is this even posible?? I mean so much more toqrue than HP's on a B16, also he says he running that on stock internals, stock internal could enough boost to make 220-250 max right??


just wanted to prove that this guy is an *** hole ans is only talking ****...

numbnuts22715

i dont see it possible, but a quick question, how would this prove anything? im not trying to be an *** or anything of that sort, just wondering.

CivicMexicano

Just to prove that he's talking ****, here what he's suposedly running....


A T05-18G turbo at 5psi
larger injectors
log manifold
stock internals
act clutch...

thats it...

I just want to prove that this is not posible or very unlikely, especialy with almost no place to get a good Tune here in Mexico....


Modified by CivicMexicano at 5:01 PM 1/27/2005

HATCHingMN

it is possible to get over 300 horse to the wheel on stock internal
but never will torque be over 300.

civiccpedx

yeh the torque would definatly be lower than the whp. and stock internals are stronger on a b16, but that would take some hella tunning to get over 314whp.

CivicMexicano

but is it even posbile with that turbo at only 5 psi???

Lee_Delso

IMO no...he's talking out of his ***.

jdmeg9

not a chance

no_go

no chance buddy..never seen honda torque in b-series higher than hp..onna ls they're pretty close other than that b-series always has high hp

CivicMexicano

Cool thanks........