Projekt 2.0 Si / A Few Questions
#1
Junior Member
Thread Starter
Join Date: Nov 2006
Location: Manhattan, KS, United States
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Projekt 2.0 Si / A Few Questions
Not sure who all has been keeping up with my stupid threads but I just had a few questions. I'm doing a B20V and it's because I blew up my B16A. A few people have been telling me to mill the head and have it magnafluxed(sp)? First of all, I'm really not sure what Magnafluxing is, also, how am I will I be able to visually tell if I actually NEED to do that ****? Other than that I've got everything else I need to complete my swap part wise as of tonight. Please let me know if you guys have any comments.
Thanks a bunch!
(By the way, my Mugen valve cover came in! It's blue!)
-Rafe
Thanks a bunch!
(By the way, my Mugen valve cover came in! It's blue!)
-Rafe
#3
Junior Member
Thread Starter
Join Date: Nov 2006
Location: Manhattan, KS, United States
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: Projekt 2.0 Si / A Few Questions (Crazy4Honda)
Well first, let me tell you what all I found to be wrong with it.
(Remember, I'm doing the swap for a reason)
----------------------------------------
Ate up Piston 3
Rings on Piston 1
and it might be cracked on the driver-side rear
----------------------------------------
Let me clean it all up and I'll tell you if it's cracked or not. And no, you wouldn't get the head.
(Remember, I'm doing the swap for a reason)
----------------------------------------
Ate up Piston 3
Rings on Piston 1
and it might be cracked on the driver-side rear
----------------------------------------
Let me clean it all up and I'll tell you if it's cracked or not. And no, you wouldn't get the head.
#6
Junior Member
Thread Starter
Join Date: Nov 2006
Location: Manhattan, KS, United States
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: Projekt 2.0 Si / A Few Questions (SomedaySoon)
I suppose nobody has any ideas.
That's cool. I'll just bolt it together and see what happends.
That's cool. I'll just bolt it together and see what happends.
Trending Topics
#9
Junior Member
Thread Starter
Join Date: Nov 2006
Location: Manhattan, KS, United States
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: Projekt 2.0 Si / A Few Questions (MiamiEJ1)
Sorry for not searching first, just thought I'd get a quicker reply this way. Thanks for the information though!
So does anyone know how I can visually tell if my head is damaged enough to be milled? Before I waste another head gasket putting the motor together?
Thanks ahead.
So does anyone know how I can visually tell if my head is damaged enough to be milled? Before I waste another head gasket putting the motor together?
Thanks ahead.
Thread
Thread Starter
Forum
Replies
Last Post
riceburners1
Hybrid / Engine Swaps
3
03-31-2004 08:06 AM