saigon1965

Hello all, am new to this- Did the search can't find anything specific to this so am asking- what do i need to convert a non-power 00 DX coupe to power windows and locks? I've found two complete doors from an 00 Si that I can swap out with my panels, but my questions is what else do I need to make it all work? Thanks for helping a noob out.

Ls_V_TurboSi

you need the middle harness that runs along the middle of the car.. that goes to the fuel pump and stuff if you want plug and play.. Otherwise you'll need to wire up the doors some how..

saigon1965

What's all connected to that harness? Thanks for your help. Already sounding like too much will be involve.

J-Star

https://honda-tech.com/zerothread?id=1065575

and next time, please search

saigon1965

Thanks all, i am new to the forum so not feeling my way around comfortably yet, but found Cuong-Nutz's write-up just now. Wonderful details. Again thanks to all.

Cuong-nutz

The link in my write up will have also a lil how to to do the swap on EK models If you have further questions.... try searching it up.. There's lots of info. Monicle also knows too.