Power Steering Pressure Switch
06-28-2003, 05:10 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Margaritaville
Posts: 7,355
Likes: 0
Received 0 Likes
on
0 Posts
Power Steering Pressure Switch
I just yanked my power steering out as I was putting in my built D16. I looped the return line into the feed line. Without thinking I cut out the power steering pressure switch. Is it going to throw a cel on a P28?
I was thinking it wouldn't matter, because I will be using power steering pin on the ecu for my Hondata nitrous control.
I was thinking it wouldn't matter, because I will be using power steering pin on the ecu for my Hondata nitrous control.
06-28-2003, 05:41 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Margaritaville
Posts: 7,355
Likes: 0
Received 0 Likes
on
0 Posts
Re: Power Steering Pressure Switch (civicVX)
Cool, no codes. So, is it ok to just loop the line the way I did, I know it's kind of ghetto, but my friend with B16 said it's been working fine for him.
Thread
Thread Starter
Forum
Replies
Last Post
577HondaPrelude
Honda Prelude
10
09-19-2012 06:34 PM
FuriousYellowSi
Honda Civic (2001 - 2005)
1
10-18-2008 10:42 AM
Espec_rep
Hybrid / Engine Swaps
4
11-14-2004 09:30 AM
