possible parts to use on EG civic...
02-05-2002, 02:21 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2001
Location: Yokosuka, Japan
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
possible parts to use on EG civic...
will any of the 2nd gen integra parts swap over to an EG civic? mostly looking at rear disc brake conversion and maybe suspension.
02-05-2002, 06:24 PM
#2
Re: possible parts to use on EG civic... (*******)
will any of the 2nd gen integra parts swap over to an EG civic? mostly looking at rear disc brake conversion and maybe suspension.
02-05-2002, 09:15 PM
#4
Join Date: Feb 2002
Location: rigged and ready., WashingtonD.C./FlagstaffAZ/TempeAZ usa
Posts: 842
Likes: 0
Received 1 Like
on
1 Post
Re: possible parts to use on EG civic... (*******)
by suspension I hope you mean strut bars because we had a discussion about this awhile back on the superhonda board, someone asked about using teg springs on his CRX well unless you want a monster truck I would just go w/ aftermarkets because teg springs are made for a heavier car, putting them on a lighter car is just gonna lift it as far as compatiblilty is concerned I am not sure about using 2nd gen parts on an EG, sorry
02-05-2002, 10:20 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2001
Location: Yokosuka, Japan
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
Re: possible parts to use on EG civic... (hondavtecfanatic)
by suspension i mean lower control arms, compensator arms, and trailing arms. also wanna know if the hubs, knuckles, and spindles will bolt up to the eg civic so i can do a rear disc brake conversion.
Thread
Thread Starter
Forum
Replies
Last Post
hefftone79
Honda Civic / Del Sol (1992 - 2000)
8
06-28-2009 07:15 AM
sleeperls93
Honda Civic / Del Sol (1992 - 2000)
7
03-24-2004 10:36 PM
NoLipRacen
Honda Civic / Del Sol (1992 - 2000)
1
07-07-2003 05:05 PM