carlosp38

we ran a compression test on my buddys poor mans type r.. he has a jdm gsr bottom end with a usdm b16a2 head... his compression came up to 130 psi all the way around... is that normall? that seems to low for me what do you guys think could be wrong? thanks

crazyguy

thats way too low. the normal compression should be
9.5:1~11:1 compression: 210-275 psi per cylinder

carlosp38

yea.. but y would it be so low.. i dont understand.. and the car starts up fine and everything..

Blk00EJ8

Maybe you should redo the comp test. Did you do it with the engine warm or cold?

carlosp38

i did it when it was warm..y? it makes a diffrence? when is it best ???

da6er

iTrader: (13)

i had ctr's pistons and my psi was 245 all the way around. that sounds way to low to me.

FastLife617

yeah dude those numbers are low

carlosp38

yea those numbers are too low..i had an american gsr and the compression on each piston was 230..and i sold that motor and built this one..i saved the head .004 and then stock type r head gasket and 99 b16head..i dont know what the problem is..it runs stronger than my gsr and like a buety..

dtownrex

need to do the test when car is at normal operating temerature