zerovandez

iTrader: (1)

http://s14.photobucket.com/alb...2.flv

This is when the motor was freshly started. How's it sound to you guys. Lots of background noise, windy day.

orb

Almost sounds like a valve adjustment is needed, but it was hard to hear in that vid. G/L with it though.

VRD^don

sounds like a heat shield is rattling hardcore...

97civicdx

valve adjustment

sageuvagony

Maybe its just ME but every time I happen to stumble upon a Bxx engine idling they always sound like they need a valve adjustment. That engine is LOUD!! Sounds like a diesel... But this doesnt mean I don't want your engine

zerovandez

iTrader: (1)

Cool. I didn't want to hear that I have rod knock lol. I'll post another video up today after the car has been driven.

zerovandez

iTrader: (1)

Alright guys, here's an updated video after I ran it on the freeway at about 75mph 5krpm max. Restarted and started a couple different times. Everything sound ok?

http://s14.photobucket.com/alb...4.flv

Oh, and when I accelerate and climb rpm's quickly, I feel vibration through the steering column and hear clicking. It also happens when I turn right, no so much turning left. Any ideas as to what this maybe? I think it's an axle issue. Thoughts or suggestions?

projecthatch92

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zerovandez &raquo;</TD></TR><TR><TD CLASS="quote">
Oh, and when I accelerate and climb rpm's quickly, I feel vibration through the steering column and hear clicking. It also happens when I turn right, no so much turning left. Any ideas as to what this maybe? I think it's an axle issue. Thoughts or suggestions?</TD></TR></TABLE>

i don't really know about your engine, but that clicking noise when you turn right could just be that your passenger side cv boot is cracked, at least it made that clicking noise wheneven i turned right...

Rainy City

its hard to tell without a high quality mic.

zerovandez

iTrader: (1)

It actually doesn't sound that bad in person. I think i'm more concerned about that clicking than anything else. If the motor goes to ****, go well lesson learned.

Oh BTW, it's a built motor with cp pistons and eagle rods. Rod bearings are oem and main bearings are ACL. I measured the clearances and they were all within spec. I also drained the oil to check for metal shavings and there wernt any.

zerovandez

iTrader: (1)

anybody else?

zerovandez

iTrader: (1)

any expert engine builders wanna leave their input?