austinkli

Ok so I just got my new motor in. I am replacing my D15B7 with a D15B w/vtec. I got the new ecu already. Pretty much everything I am going to need.

I know that I just need to do a little rewiring to the harness to hook up the vtec. Could somebody please "SHOW" me how? I'm asking for a picture or pictures showing how to wire it.

My step dad is helping me put it in, and he is overly thorough and wants to get pictures. Any help with this?

ifIexplode

What year is your car?
You really dont need pictures. I can walk you through it.

There is a little clip to pull up on the ECU plug that locks the pin in.

austinkli

Car is a 92, putting in a 94 D15b.

And yes I do need pictures. Pretend I'm an idiot that knows nothing about cars.

austinkli

bump


anybody???? Help help? come on guys, don't make me go post this in GDD, i don't wanna get flamed.

Allurian

all 92 are already pre-wired w/ vtec no wiring needed

austinkli

Come on... Seriously??? Nobody?

MWLW20

Wiring is need for the engine harness. It is pre-wired from the engine to the ECU.

https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/wiring-vtec-1650793/

92ehatch

ill third this.

the only wiring you could possibly have to do is from the engine to the shock tower. the first pic, right side harness.

but if you use a UDSM ex or si engine harness (d16z6) then the wiring for vtec will already be there.

Diller

Sweet man you got the d15
*e high five*
If you still need help I think Rywire has a kit already made, not 100% sure though.

MWLW20

It took me like 15-20min to wire it to the USDM harness but I'm pretty sure a 92-95 ex or si harness would work as well

austinkli

EGricky

i have the same situation. I went from a d16a6 v-tec and put a d15b v-tec in my car. so there is some wiring changes to be done to make it work with the jdm motor