PISTON SWAP
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: Hagerstown, MD
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
PISTON SWAP
Yo, im trying to yank the stock pr3 pistons off of the stock rods, I want to get some of the valve relief area ground out a little bit to further ensure no valve to piston contact. Any Suggestions on how to get the pistons off the rods, torch the rod and knock out the wrist pin maybe? The gsr rods should work with the b16 pistons too right?
Thread
Thread Starter
Forum
Replies
Last Post
pheonixb16aguy@hondaswap
All Motor / Naturally Aspirated
2
05-25-2005 04:27 PM
vtecn8ive
Acura Integra
12
12-02-2004 09:26 PM