Stryker908

Hey guys some of you may remember my hatch from a couple months ago



Well It got its front shoes back on (yay)





Interior





and engine





Next mods

Rear disk conversion
New front clip (bumper fenders and hood are all banged up )
drop it (after I get a camber kit .. not going a year with the stocks up front
again)
New pait job


Thoughts comments Ideas ?

Enjoy

IM ALL BOB

looks like going off roading .. what are those 17inch rims =P j/k well good luck with your car

Stryker908

Yeah 17's .. you should have seen it when I picked it up from the guy it had 85 series tires on all 4 corners ... that looked like an suv!!!!!

chameleon

nice job on the seats, how hard was it to get them in there?

976

Are they 90-91 prelude si seats?

You must run better than 15.6!!!

Something has to been wrong. I believe nsxmatt with EH2, bolt-ons, and stripped ran a 14.2 - That's goog stuff, something you should aim for!

Anyway, nice ride, give us the after drop shots!

JSJ EG6

do that strut bar clear ur hood?to me it looks to tall????

Stryker908

Yeah It clears it .. I dont know how .. its a Tenzo R strut bar the very first mod I ever got back in 95 for my old 4dr ...

as for the seats they are out of a prelude 96 if I remember right ... to get em in I had to drill some new mounts. (both sets of rails were welded on ) I just went to home depot and got some self taping bolts and drove them through the floor boards

oh and the 15.6 yeah it was my 1st time ever trying the Legal racing thing .. just need some practicce .. if you read the link on my sig. you'll see the whole story .... bald tires ... hot day (107 with crazy humidity) exc.

New springs that are going on as soon as I get my camber kit ... Tires are way too expensive !!!!



[Modified by JDM_SIR_II, 7:43 AM 11/26/2002]


[Modified by JDM_SIR_II, 7:49 AM 11/26/2002]

TurBoXBirD16

rims too big
car too high
ugly steering wheel
ugly racing seat

engine

just being honest here

good luck though


[Modified by TurBoXBirD16, 4:46 AM 11/26/2002]

spoonee

needs to be lowerd quick......

Hammett

lower it..

kikiboi

looks good.

Stryker908

Honesty good ... I like my rims waiting to drop it right (camber adjustment) steering wheel was replaced cuz the one in there was a mess cheap and easy (auto zone) Race seats = prelude seats

thanks for the love on the engine though

Keep em comming !

Stryker908

Ingles camber ? skunk2 ? what do people like here ?

Loco Honkey

Unless you're lowered more than 2.75", a camber kit isn't needed. On Hondas lowered less than that, camber doesn't kill the tires. TOE does. Get a professional toe alignment done and you won't have a problem.

Stryker908

on my old car ... I burned the inside of my tires off in about 4 months (old car being civic 4dr) was that the toe ?

EK MONEY

iTrader: (5)

get skunks and drop it mildely. Then slam it when you get chamber kits. Not THAT big of a deal.

civicgsr93

Yes that was the toes!!!! Had the same problem 3 years ago, before I learned about cars Your turn to learn!!! Everyone does!!!

And for the tires being expensive, go smaller in wheels, tires are alot cheaper.

PSU

iTrader: (2)

nice username with a LHD car

civicgsr93

LOL

hoya_10fintec

i think..

- rims....
- way too high off the ground...
- everything else...

BTW.. nice paint job on the bumper.. and is that a crack on the right front corner?

Stryker908

Front was covered in grease and oil that was when I was taking the motor out of my old car and putting it in the HB .. and yes it is cracked in the front pass side ..damn you guys dont miss a damn thing !!!!

is a JDM RHD car that was converted to a LHD then shipped across the ocean dissasembled in Canada and put back together before being sold on a us lot ... so na na na na ... I am JDM ... and I use this screen name just to make you mad ...yes just you DXhatchback haha I hope I wrecked your entire week LOL


Lighten up they are just cars