Photo Request: Upper Balljoint on 92-95 Civic when it's in place.
#1
Honda-Tech Member
Thread Starter
Photo Request: Upper Balljoint on 92-95 Civic when it's in place.
I'm trying to tell if mine are bad-- there's a noise coming from one side. I need to see how the upper balljoint sits when it's in place... if it's flush or what. Thanks in advance.
#3
Honda-Tech Member
Thats easy... Grab the top of your tire with the car parked. one hand on the inside one on the out and push the top or the tire IN AND OUT for a few seconds very hard and feel for play. If there is then the balljoint is bad.
But watch for crappy baljoint ive seen poor ones not even last 6 months on rough roads.
I know a place with a good solid upper for honda for 29$ USD
Steve
But watch for crappy baljoint ive seen poor ones not even last 6 months on rough roads.
I know a place with a good solid upper for honda for 29$ USD
Steve
#4
Honda-Tech Member
Thread Starter
Re: (s_vares)
Ill try that out. The top of them isn't flush. They each stick out at least 1/4" -- thts why im asking. Thanks for the info.
Thread
Thread Starter
Forum
Replies
Last Post
newhondaowner29
Honda Accord (1990 - 2002)
12
05-16-2011 01:11 PM
CHONCH2
Honda Civic / Del Sol (1992 - 2000)
4
04-02-2009 09:13 AM