passed bar today.
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: satans a hole, CA, US
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
passed bar today.
mod, if this topic doesnt belong move it or delete it.
ok i'm relieved. no more worrying about my swap legality. some said its a waste of money. but i did it because i'm not planning on going big with modifications. i just wanted a reliable, legal bump in power for my DD, seeing as how i drive soo much and i use the car to pick up small orders here and there. the drive is very comfortable and still very quiet. and to me, the car looks good. i'm still going to clean up the engine bay but for now, itll do.
looks stock, but i'm going to take the heart out and spray the bay the same as the rest of the car
thats what my car looks like now (dad's driving )
and a huge to Inlinefour.com as well as Victor and Chris from JDMautohaus in San bernardino they all helped alot (except the employees from autohaus)
ok i'm relieved. no more worrying about my swap legality. some said its a waste of money. but i did it because i'm not planning on going big with modifications. i just wanted a reliable, legal bump in power for my DD, seeing as how i drive soo much and i use the car to pick up small orders here and there. the drive is very comfortable and still very quiet. and to me, the car looks good. i'm still going to clean up the engine bay but for now, itll do.
looks stock, but i'm going to take the heart out and spray the bay the same as the rest of the car
thats what my car looks like now (dad's driving )
and a huge to Inlinefour.com as well as Victor and Chris from JDMautohaus in San bernardino they all helped alot (except the employees from autohaus)
#4
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: satans a hole, CA, US
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Re: (solbrothers)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by solbrothers »</TD></TR><TR><TD CLASS="quote">BTW. is that a usdm motor or JDM?? </TD></TR></TABLE>
USDM motor, didnt want to deal with adding parts to the JDM intake mani or swapping the whole thing, plus, no one would let me inspect the JDM engine first.
what cel are you throwing?
#5
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: satans a hole, CA, US
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Re: (solbrothers)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by solbrothers »</TD></TR><TR><TD CLASS="quote">code 10, INTAKE AIR TEMPERATURE SENSOR. i kont know/cant find out what the problem is </TD></TR></TABLE>
have you traced the wiring? or how much voltage its getting?
have you traced the wiring? or how much voltage its getting?
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: satans a hole, CA, US
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Re: (solbrothers)
first thing to do is take a wiring class at your local college, then when your familiar with the car wiring, get your self the wiring diagrams for the iat sensor, and start tracing the wire and diagnosing the problem.
#10
Honda-Tech Member
iTrader: (1)
Join Date: Dec 2005
Location: the UNE., is where i stay
Posts: 1,697
Likes: 0
Received 0 Likes
on
0 Posts
Re: passed bar today. (96civb18c1)
im curious. i have a hatch bar'd for a LS and it also says ACURA/1.8L can you have it bar'd and run any acura 1.8L like gsr/type-r/ls or is it just bar'd for that specific motor?
#11
Honda-Tech Member
Thread Starter
Join Date: Jul 2006
Location: satans a hole, CA, US
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Re: passed bar today. (98jdmsirg)
usually i've seen the sticker say 1.8 dohc vtec in the comments section. but mine doesnt say that. so i guess you can run a vtec head.
Thread
Thread Starter
Forum
Replies
Last Post
Bumnah
Honda Civic / Del Sol (1992 - 2000)
116
09-29-2011 05:50 AM
John Z
Acura Integra Type-R
25
01-07-2007 09:05 AM