Overheated d16..have head machined or just buy a remanufatured head?
#1
Thread Starter
Join Date: May 2002
Location: Valdosta, GA, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Overheated d16..have head machined or just buy a remanufatured head?
Well chapter 2 in my repairs to my 92 si: Head is now off and I know that its probably warped some since it overheated and blew the head gasket. I have never dealt with a machine shop so I have no clue whats involved pricewise when fixing a head. I found an HT advertiser that will send me a rebuilt head and felpro gasket for $391 shipped. Also, if I decided to take my head to a machine shop, would I need to remove all of the valve train etc before they can machine it? Is it safe to reuse my old head bolts?
What would you guys do?
What would you guys do?
#2
Honda-Tech Member
Re: Overheated d16..have head machined or just buy a remanufatured head? (92hatchdude)
You can purchase an entire engine for 300!!!!
Why bother with a new head?
Search the classifieds too....oh ****, follow the link in my sig.
Why bother with a new head?
Search the classifieds too....oh ****, follow the link in my sig.
#3
Thread Starter
Join Date: May 2002
Location: Valdosta, GA, USA
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Re: Overheated d16..have head machined or just buy a remanufatured head? (Spade)
You are right about the engine prices. I am considering looking for a head from a reputable HT member. I just want to make sure that whatever I get is going to work and hold up for more than 200 miles. So if anyone has a GOOD d16z6 or compatable head, hit me up and we can talk.
#4
Member
Join Date: Aug 2001
Location: Baltimore, maryland, usa
Posts: 5,084
Likes: 0
Received 0 Likes
on
0 Posts
Re: Overheated d16..have head machined or just buy a remanufatured head? (92hatchdude)
Are you interested in selling your d16z6 you have now.. I need one for rocker assembly parts..
#5
Honda-Tech Member
Join Date: Feb 2003
Location: schooling kids in ny, usa
Posts: 9,813
Likes: 0
Received 9 Likes
on
9 Posts
Re: Overheated d16..have head machined or just buy a remanufatured head? (tgreaves)
look around in the classifieds. im sure you can run into a z6 head that has been worked (p&p, 3 angle...) for a few hundred. i have a z6 head with 130,xxx miles on it sittin in my basement- its not complete but if u want more info pm me on here.
#6
Re: Overheated d16..have head machined or just buy a remanufatured head? (blackeg)
It's not a big deal, take the head to reputable machine shop, get them to resurface the head.....You might have to take out the cam and cam caps...They shouldn't charge you more than 100$....For the price of a reman head...you could shave the head and buy a adjustable cam gear and have money left over for beer
Thread
Thread Starter
Forum
Replies
Last Post
domestic_rice
Honda Civic / Del Sol (1992 - 2000)
8
09-25-2005 12:49 PM