Takeoff

I just paid for some brakes at a junk yard yesterday. They told me they would have all the parts ready for pickup today. They are giving me a full conversion(front & back) from a GSR. I am not familiar on what these parts look like, so are there part #'s printed on them. How can I make sure they are the right parts when I pick up. If so can anyone send me the #'s. Thanks.

Takeoff

If anyone here has the helm's manual for a 94+ GSR and can scan the schematic of the brakes I would greatly appreciate this. Thanks.

rolow

Try here! Sorry I could not be more help.

http://www.acuraautomotiveparts.net

DOHCtorTHRUST

the spindles for the front will be bigger then the civics, if you have a hatch theres no comparison when you look at the gsr's.....also... there should be a wire for the ABS on the spindles, both front and back.... that is KEY... i'm not sure about the civic EX that has ABS..... hope this helps.....BTW how much you paying for the whole thing?

Takeoff

I got it all for 350$. Everyone told me it is a good deal.
Relow: Thanks. that site helped.


[Modified by Takeoff, 5:42 PM 6/26/2002]

DOHCtorTHRUST

thats a very good price IMO, i got the gsr spindles(front) for 250.....i still have the drums in the back.... make sure you get the cables for the e brake

XchtmgX

if you can take the old rotors form your dx they should be a inch smaller in diameter then the gsr