Danny Sihapanya

Bought my friends kentwood 2 10' subs with his 320 watt kentwood amp with all the wiring. For $50

jbpnoman

Are we talking about your car, or my ex? From the shots I've seen, I don't know how we could be talking about your car...

Libertariat

With me in it's it's about 2450lbs

Just shy of 2300lbs without me.

pliskin8

iTrader: (1)

detailled the interior of my ej6 then drove to the hobby store for some supplies to finally finish my McClaren Honda MP4/4, one of the most dominat cars in F1 history driven by THEEE best driver in F1 history-Ayrton Senna

jbpnoman

Once again...my ex, or your car?

How does your car weigh 2300? My car from the factory weighs 2319, and it's a sedan.

bradleyg

I got a new cap and rotor, and plugs and wires.

Hcivic22

thanks man just got them powder coated a few weeks ago

sibleywibbley

Now that, is a damn fine model you got there. You make that all from ground up? That needs a clear cabinet for a center piece of a room.

Geo4k

Got my check engine light read - came on yesterday. P1163, seems to happen to HXs alot... No 1 O2 sensor, possible crack in the exhaust manifold or bad connection. A quick look on Bernarldi said $385.51 for a new sensor. I fly out of here Thursday morning and won't be back for a week, I'll sniff around then and see for sure. My luck being what it is, it won't be a cheap fix....

sfar785

sold my EG today got $3000 for it and i didn't have a dime into the car so i made a pretty nice profit....time to build another one!!

KY2K20

Finished prepping and painting all the rest of the lca's. Replaced alll the factory bushings with energy suspension pieces. Pulled the subframe and replaced the the steering rack bushings. No factory rubber remainsStill sooooo much to do

Yo Pintura Trenes

Under-dash courtesy lights form Legend trunk x2

brent08

Just bored so I decided to paint my valve cover. from red to yellow

grumblemarc

iTrader: (4)

Pics.

EJ8_Man

Started pressing out bushings and replacing with energy suspension kits.
Replaced F/R brakes and rotors
Installed Ground Controls / Koni Yellows
Oil Change

95tegbuild

Fixed issue with 01 Gsr swap
Hit vtec mad hard after I hit up the car wash

guessohw

Did a complete engine oil flush to clean out any old crap in the motor. Used Mobil 1 syn and filter. Also replaced tie rod ends before work this morning, now just waiting on alignment to be completed!

guessohw

Completed second trans fluid swap with more Honda ATF. Ready to ride with smooth tranny!

Crashmaster91

Ordered a new head gasket, cam seal and valve cover gasket. Gettin ready to do a rebuild on my b16a head with all ITR internals. Should scream. Also have BWR LCA's and raceland struts waiting to be put on. Just need the time now.

Solidis

Washed my 95 civic .. N filled it on 91

furious94ls

Washed and waxed it. Checked oil and tire pressure. Cleaned the license plate light lenses. Checked and adjusted the headlight pattern. Drove around with the A/C on to make sure it was working correctly. 40 degrees out of the vents. Love this car.

jbpnoman

Decided to polish a turd. Full hand wash, followed by rubbing compound, followed by polishing compound, followed by wax, followed by polishing compound again, followed by more wax. Attacked the wheels with mag cleaner, and the tires with some high quality tire brightening polish.

Now I just need to polish up the interior, replace the hood, and get some fresh interior pieces.

Thmanx

I decided I wanted to sell my Jackson Supercharged B16A2 build and start a new.

I've been able to get my hands on one of the last B18C5 R-DOT short blocks, and DOT assembled heads. (lol the date on the head says its a 2005!!! loll) Yeah, I'm going to have a '2005' 2001 USDM spec C5.


Doing a 100% brand new B18C5 drop in, new water pipe, oil cooler, pumps, blah blah blah. I think it'll be pretty awesome.
0 miles, 45k factory warrantee, SMOG legal, and not stolen.

Yeah i think its worth it.

Link in the sig if your interested.

Will-Survive

installed right side door panel on my 99EK. Got panel for free with speaker grille. since panel is charcoal grey, also switched out inner door handle w/lock and surrounding trim, and power window switch to match the door panel. all parts free. one side done, waiting to do the other side. prefer charcoal grey over the light grey.

pliskin8

iTrader: (1)

yep from the groud up, the empty space there is reserved for my upcoming 2005 JGTC ARTA NSX that i'll be doing next (notice the CTR in the corner!)

On a side note sold some stuff i had laying around from both my ej6 & ej8, got enough money together to finally get my valve cover powder coated tomorrow, still not sure of the color though