Official D-series For sale and WTB thread
#27
Honda-Tech Member
Join Date: Feb 2003
Location: Oregon
Posts: 3,219
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official D-series For sale and WTB thread
First off, this kit has very low miles on it (under 500 miles). It has been sitting outside in a crx which is why the flanges are rusty. I am getting rid of it because I am going B-Series. Kit was in my eg with a D16Z6 for like 2 weeks. NOTE: THIS MANIFOLD WAS DESIGNED TO FIT INTO A CRX AND WILL NOT FIT ANYTHING BIGGER THAN A .63 A/R 5 BOLT EXHAUST HOUSING. You can not use the lower torque mount with this manifold. Here is a list of everything included.
-D Series NSR Technologies Topmount Manifold. Stainless Schedule 40 runners. 1/2" mild steel flanges
-T3 ebay turbo .63 exhaust. 5 bolt housing. Custom welded compressor housing with a short radius 90
-38mm adjustable wastegate. from 8-12 I believe?
-Stainless dumptube
-2.5" downpipe that dumps up front
-2.5" charge pipes
-2.5" silicone couplers and clamps
-50mm vband Blow off valve (bov)
-Fast turbo oil feed line kit with the bspt block fitting
-10AN Stainless braided return line
-22x7x2.5 intercooler (core size) I just bolted it straight to the bumper support
No injectors, ecu, or resistor box. $1500. Thanks.
First pic in the album is in a crx.
http://s771.photobucket.com/albums/x...s/Turbo%20Kit/
-D Series NSR Technologies Topmount Manifold. Stainless Schedule 40 runners. 1/2" mild steel flanges
-T3 ebay turbo .63 exhaust. 5 bolt housing. Custom welded compressor housing with a short radius 90
-38mm adjustable wastegate. from 8-12 I believe?
-Stainless dumptube
-2.5" downpipe that dumps up front
-2.5" charge pipes
-2.5" silicone couplers and clamps
-50mm vband Blow off valve (bov)
-Fast turbo oil feed line kit with the bspt block fitting
-10AN Stainless braided return line
-22x7x2.5 intercooler (core size) I just bolted it straight to the bumper support
No injectors, ecu, or resistor box. $1500. Thanks.
First pic in the album is in a crx.
http://s771.photobucket.com/albums/x...s/Turbo%20Kit/
#30
Re: Official D-series For sale and WTB thread
WTB: jrsc crank pulley for d16y8 or d16y7. must be offset for this kit. let me know if you can get a stock pulley or upgrade one
#32
Honda-Tech Member
Re: Official D-series For sale and WTB thread
I have a few good turbo D series parts.
D16a6 short block with Vitara Pistons, FJ rods, and Z6 crank. Pisons are 75.5. Motor was ran for about 1200 miles. Short block is currently assembled. Has PS and alternator currently on it, will sell these with block. Will not part out short block. $600
-D16z6 Cylinder Head. Complete, but disassembled. Comes with all stock parts (valves, springs, retainer, cam ect) I also have a painted red valve cover I can throw in if needed. $150
-D series Turbo manifold. Made by spoolin performance. Its the prototype1, t3 flange, with 38mm gate flange. Also comes with 3 inch downpipe, and dumptube. These parts are BRAND NEW! was mocked up on car, started, then taken off. Will not part out manifold and DP. http://www.spoolinperformance.com/sp...ype1-p-56.html $700
-D16 Edelbrock Performer X intake manifold. Great shape. $225
-D16z6 Crank. Great shape $150
-D16z6 ARP headstuds. Used on the FJ vitara motor posted above. $75
PM me and I can email pictures if needed. Prices are OBO and buyer pays shipping.
D16a6 short block with Vitara Pistons, FJ rods, and Z6 crank. Pisons are 75.5. Motor was ran for about 1200 miles. Short block is currently assembled. Has PS and alternator currently on it, will sell these with block. Will not part out short block. $600
-D16z6 Cylinder Head. Complete, but disassembled. Comes with all stock parts (valves, springs, retainer, cam ect) I also have a painted red valve cover I can throw in if needed. $150
-D series Turbo manifold. Made by spoolin performance. Its the prototype1, t3 flange, with 38mm gate flange. Also comes with 3 inch downpipe, and dumptube. These parts are BRAND NEW! was mocked up on car, started, then taken off. Will not part out manifold and DP. http://www.spoolinperformance.com/sp...ype1-p-56.html $700
-D16 Edelbrock Performer X intake manifold. Great shape. $225
-D16z6 Crank. Great shape $150
-D16z6 ARP headstuds. Used on the FJ vitara motor posted above. $75
PM me and I can email pictures if needed. Prices are OBO and buyer pays shipping.
#35
Honda-Tech Member
Join Date: Apr 2008
Location: Alliston, On, Canada
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official D-series For sale and WTB thread
im sure someone could find use for this stuff...
forsale
http://hondamarketplace.com/showthread.php?t=2828417
forsale
http://hondamarketplace.com/showthread.php?t=2828417
#40
Honda-Tech Member
Re: Official D-series For sale and WTB thread
I have a few good turbo D series parts.
D16a6 short block with Vitara Pistons, FJ rods, and Z6 crank. Pisons are 75.5. Motor was ran for about 1200 miles. Short block is currently assembled. Has PS and alternator currently on it, will sell these with block. Will not part out short block. $600
-D16z6 Cylinder Head. Complete, but disassembled. Comes with all stock parts (valves, springs, retainer, cam ect) I also have a painted red valve cover I can throw in if needed. $150
-D series Turbo manifold. Made by spoolin performance. Its the prototype1, t3 flange, with 38mm gate flange. Also comes with 3 inch downpipe, and dumptube. These parts are BRAND NEW! was mocked up on car, started, then taken off. Will not part out manifold and DP. http://www.spoolinperformance.com/sp...ype1-p-56.html $700
-D16 Edelbrock Performer X intake manifold. Great shape. $225
-D16z6 Crank. Great shape $150
-D16z6 ARP headstuds. Used on the FJ vitara motor posted above. $75
PM me and I can email pictures if needed. Prices are OBO and buyer pays shipping.
D16a6 short block with Vitara Pistons, FJ rods, and Z6 crank. Pisons are 75.5. Motor was ran for about 1200 miles. Short block is currently assembled. Has PS and alternator currently on it, will sell these with block. Will not part out short block. $600
-D16z6 Cylinder Head. Complete, but disassembled. Comes with all stock parts (valves, springs, retainer, cam ect) I also have a painted red valve cover I can throw in if needed. $150
-D series Turbo manifold. Made by spoolin performance. Its the prototype1, t3 flange, with 38mm gate flange. Also comes with 3 inch downpipe, and dumptube. These parts are BRAND NEW! was mocked up on car, started, then taken off. Will not part out manifold and DP. http://www.spoolinperformance.com/sp...ype1-p-56.html $700
-D16 Edelbrock Performer X intake manifold. Great shape. $225
-D16z6 Crank. Great shape $150
-D16z6 ARP headstuds. Used on the FJ vitara motor posted above. $75
PM me and I can email pictures if needed. Prices are OBO and buyer pays shipping.
#41
Re: Official D-series For sale and WTB thread
f/s d16 vtec head with skunk2 valve train and stock cam install asken 250 o.b.o also willen to take trade for set of si or ls rims in decent shape im in NWI
#42
Honda-Tech Member
Thread Starter
Join Date: Nov 2004
Location: Redding, CA, us11
Posts: 1,473
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official D-series For sale and WTB thread
p2p0 BNIB Custom length D16 Vitara I-Beam connecting rods $292.00
www.p2p0.com if you never seen them
www.p2p0.com if you never seen them
#43
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2004
Location: celina, ohio, usa
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official D-series For sale and WTB thread
i have a garrett t04e turbo for sale
had it on my d16 for a summer made 302 whp and 12.20s in the 1/4
57 trim .48 backside no shaft play
asking 400 for it, has approx 8k on it, upgraded to a 60-1 is reason for selling
pm for more info and pics
had it on my d16 for a summer made 302 whp and 12.20s in the 1/4
57 trim .48 backside no shaft play
asking 400 for it, has approx 8k on it, upgraded to a 60-1 is reason for selling
pm for more info and pics
#44
Honda-Tech Member
Join Date: May 2010
Location: Central Virginia
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Re: Official D-series For sale and WTB thread
Fs: z6 block, 2 z6 heads, uncut vtec harness, p28 ecu( I can chip and socket if you want)
Please pm for details, don't post here to reply to my post, I won't see it.
Please pm for details, don't post here to reply to my post, I won't see it.
#45
Re: Official D-series For sale and WTB thread
EF) civic/crx 3 Hole A-Pillar Gauge Pod..... $25
(EF) center console face.. where climate control goes and head unit.... $20
pair of (EF) civic/crx front windows... asking $50 for both
94 integra armrest.... asking $35
pm5/6 distributor cap... $5
88/89 (EF) front jdm amber turn signal covers.... $15
(6) oem/ aftermarket gas caps... $5 each
(1) set of EF spark plug wires NGK..... $10
(1) set of EF spark plug wires Bosch .... $7
(1) KYB (strut) mount kit..... $7... brand new
(6) sets of D-series injectors..... $30 per each set
(1) set of universal injector clips with wires.... asking $20
(1) mini k&n filter... $20
(1) hood pin latch kit... $20
(1) d-series exhaust gasket... metal... $5
(3) 88-91 factory headlight retainer clips.... $5 each
(1) EF map sensor.... $50
(2) washer fluid blue caps....$5
(1) set of EF civic/crx door seals.... $50
(1) EF map sensor.... $50
(1) 90 Honda Civic map sensor purge cut solenoid unit..... $50
2530 prop valve
(6) pairs of windows cranks... $10 pair or....$5 each
(3) stock 5speed shifter ***** $5 each
(2) sets of 88-91 civic oem battery tie down... $10
LS/Vtech steel braided oil line.... $30
(1) pair civic/ crx power door locks with actuator.... $50
(3) pair of windshield wiper arms...... $20 a pair
(1) universal door lock actuator... $25
(2) pair of rear pods for hatch... $20 a pair
(1) front ash tray for (EF) civic..... $5
(1) rear ash tray for civic...... $5 each
(3) dome light units..... $15
(1) rear view mirror... $ 20
(1) passenger side view mirror... $30
(5) corner dash vents.... $5 each
(4) visors... 2 driver .... 2 passenger.... $5 each
(2) front windshield wiper motors.....$30 each
(1) rear windshield wiper motor ...... $30
(3) door handle inside cover....$10 each
(2) dash change pocket... $15 each
(1) small dash compartment pocket .......$10
(2) JDM fog light switches
Rear brake tail light housing and cover... perfect condition..... $10
(2) ignition wire harness... $25 each
(1) driver side vent.... for (EF) dash...... $10
(1) crx corner rear glass peice... the small triangle piece..... $10
(1) interior fuse pannel cover... $5
(2) passenger grab bar... $5 each
(1) IACV for d16a6 or d15b1 or 2 series motor..... $20
(1) IACV for d16z6..... $20
(1) 88-91 Civic/Crx * HATCHBACK COWL PANEL WIPER COVER TRIM *EF.... $40
(1) main engine fuse box for EF......... $25
(2) pairs of EF hood hinges...... $15 a pair
front dash out of an Si (EF)... asking $75 or obo
center console for out of SI (EF)....asking $25
ceter shifter console......35
2 (EF) tinted front windows, driver and passenger for hatchback..... asking $60 or obo
civic/crx rear bumper with metal brace (black).... $80 or obo
EF front bumper metal reinforcement.... asking $40
CRX front bumper with corner lights.... $65 or obo
z6 intake manifold... no t/b.... asking $40
y8 intake maifold and t/b... full intake manifold... asking $65 or obo
y8 computer... p2p ecu... $30 or obo
clutch cable... great shape (used on car for 1 month)....... $25
set of stock d-series injectors.... have 4 in good working condition...... asking $40
pm6 computer... out of a civic SI....... $45
front bumper turn lights.... housing and lenses.... $20 or obo
JDM ITR front calipers with hub, rotor and mounting brakets and steel braided brake line conversion kit for a 88-96 honda civic--- asking $250 or obo
D16Z6 head... all complete just no valve cover... asking $150
D16z6 complete engine wire harness..... 130 or obo
pm me for any questions
(EF) center console face.. where climate control goes and head unit.... $20
pair of (EF) civic/crx front windows... asking $50 for both
94 integra armrest.... asking $35
pm5/6 distributor cap... $5
88/89 (EF) front jdm amber turn signal covers.... $15
(6) oem/ aftermarket gas caps... $5 each
(1) set of EF spark plug wires NGK..... $10
(1) set of EF spark plug wires Bosch .... $7
(1) KYB (strut) mount kit..... $7... brand new
(6) sets of D-series injectors..... $30 per each set
(1) set of universal injector clips with wires.... asking $20
(1) mini k&n filter... $20
(1) hood pin latch kit... $20
(1) d-series exhaust gasket... metal... $5
(3) 88-91 factory headlight retainer clips.... $5 each
(1) EF map sensor.... $50
(2) washer fluid blue caps....$5
(1) set of EF civic/crx door seals.... $50
(1) EF map sensor.... $50
(1) 90 Honda Civic map sensor purge cut solenoid unit..... $50
2530 prop valve
(6) pairs of windows cranks... $10 pair or....$5 each
(3) stock 5speed shifter ***** $5 each
(2) sets of 88-91 civic oem battery tie down... $10
LS/Vtech steel braided oil line.... $30
(1) pair civic/ crx power door locks with actuator.... $50
(3) pair of windshield wiper arms...... $20 a pair
(1) universal door lock actuator... $25
(2) pair of rear pods for hatch... $20 a pair
(1) front ash tray for (EF) civic..... $5
(1) rear ash tray for civic...... $5 each
(3) dome light units..... $15
(1) rear view mirror... $ 20
(1) passenger side view mirror... $30
(5) corner dash vents.... $5 each
(4) visors... 2 driver .... 2 passenger.... $5 each
(2) front windshield wiper motors.....$30 each
(1) rear windshield wiper motor ...... $30
(3) door handle inside cover....$10 each
(2) dash change pocket... $15 each
(1) small dash compartment pocket .......$10
(2) JDM fog light switches
Rear brake tail light housing and cover... perfect condition..... $10
(2) ignition wire harness... $25 each
(1) driver side vent.... for (EF) dash...... $10
(1) crx corner rear glass peice... the small triangle piece..... $10
(1) interior fuse pannel cover... $5
(2) passenger grab bar... $5 each
(1) IACV for d16a6 or d15b1 or 2 series motor..... $20
(1) IACV for d16z6..... $20
(1) 88-91 Civic/Crx * HATCHBACK COWL PANEL WIPER COVER TRIM *EF.... $40
(1) main engine fuse box for EF......... $25
(2) pairs of EF hood hinges...... $15 a pair
front dash out of an Si (EF)... asking $75 or obo
center console for out of SI (EF)....asking $25
ceter shifter console......35
2 (EF) tinted front windows, driver and passenger for hatchback..... asking $60 or obo
civic/crx rear bumper with metal brace (black).... $80 or obo
EF front bumper metal reinforcement.... asking $40
CRX front bumper with corner lights.... $65 or obo
z6 intake manifold... no t/b.... asking $40
y8 intake maifold and t/b... full intake manifold... asking $65 or obo
y8 computer... p2p ecu... $30 or obo
clutch cable... great shape (used on car for 1 month)....... $25
set of stock d-series injectors.... have 4 in good working condition...... asking $40
pm6 computer... out of a civic SI....... $45
front bumper turn lights.... housing and lenses.... $20 or obo
JDM ITR front calipers with hub, rotor and mounting brakets and steel braided brake line conversion kit for a 88-96 honda civic--- asking $250 or obo
D16Z6 head... all complete just no valve cover... asking $150
D16z6 complete engine wire harness..... 130 or obo
pm me for any questions
#47
Honda-Tech Member
Re: Official D-series For sale and WTB thread
EF) civic/crx 3 Hole A-Pillar Gauge Pod..... $25
(EF) center console face.. where climate control goes and head unit.... $20
pair of (EF) civic/crx front windows... asking $50 for both
94 integra armrest.... asking $35
pm5/6 distributor cap... $5
88/89 (EF) front jdm amber turn signal covers.... $15
(6) oem/ aftermarket gas caps... $5 each
(1) set of EF spark plug wires NGK..... $10
(1) set of EF spark plug wires Bosch .... $7
(1) KYB (strut) mount kit..... $7... brand new
(6) sets of D-series injectors..... $30 per each set
(1) set of universal injector clips with wires.... asking $20
(1) mini k&n filter... $20
(1) hood pin latch kit... $20
(1) d-series exhaust gasket... metal... $5
(3) 88-91 factory headlight retainer clips.... $5 each
(1) EF map sensor.... $50
(2) washer fluid blue caps....$5
(1) set of EF civic/crx door seals.... $50
(1) EF map sensor.... $50
(1) 90 Honda Civic map sensor purge cut solenoid unit..... $50
2530 prop valve
(6) pairs of windows cranks... $10 pair or....$5 each
(3) stock 5speed shifter ***** $5 each
(2) sets of 88-91 civic oem battery tie down... $10
LS/Vtech steel braided oil line.... $30
(1) pair civic/ crx power door locks with actuator.... $50
(3) pair of windshield wiper arms...... $20 a pair
(1) universal door lock actuator... $25
(2) pair of rear pods for hatch... $20 a pair
(1) front ash tray for (EF) civic..... $5
(1) rear ash tray for civic...... $5 each
(3) dome light units..... $15
(1) rear view mirror... $ 20
(1) passenger side view mirror... $30
(5) corner dash vents.... $5 each
(4) visors... 2 driver .... 2 passenger.... $5 each
(2) front windshield wiper motors.....$30 each
(1) rear windshield wiper motor ...... $30
(3) door handle inside cover....$10 each
(2) dash change pocket... $15 each
(1) small dash compartment pocket .......$10
(2) JDM fog light switches
Rear brake tail light housing and cover... perfect condition..... $10
(2) ignition wire harness... $25 each
(1) driver side vent.... for (EF) dash...... $10
(1) crx corner rear glass peice... the small triangle piece..... $10
(1) interior fuse pannel cover... $5
(2) passenger grab bar... $5 each
(1) IACV for d16a6 or d15b1 or 2 series motor..... $20
(1) IACV for d16z6..... $20
(1) 88-91 Civic/Crx * HATCHBACK COWL PANEL WIPER COVER TRIM *EF.... $40
(1) main engine fuse box for EF......... $25
(2) pairs of EF hood hinges...... $15 a pair
front dash out of an Si (EF)... asking $75 or obo
center console for out of SI (EF)....asking $25
ceter shifter console......35
2 (EF) tinted front windows, driver and passenger for hatchback..... asking $60 or obo
civic/crx rear bumper with metal brace (black).... $80 or obo
EF front bumper metal reinforcement.... asking $40
CRX front bumper with corner lights.... $65 or obo
z6 intake manifold... no t/b.... asking $40
y8 intake maifold and t/b... full intake manifold... asking $65 or obo
y8 computer... p2p ecu... $30 or obo
clutch cable... great shape (used on car for 1 month)....... $25
set of stock d-series injectors.... have 4 in good working condition...... asking $40
pm6 computer... out of a civic SI....... $45
front bumper turn lights.... housing and lenses.... $20 or obo
JDM ITR front calipers with hub, rotor and mounting brakets and steel braided brake line conversion kit for a 88-96 honda civic--- asking $250 or obo
D16Z6 head... all complete just no valve cover... asking $150
D16z6 complete engine wire harness..... 130 or obo
pm me for any questions
(EF) center console face.. where climate control goes and head unit.... $20
pair of (EF) civic/crx front windows... asking $50 for both
94 integra armrest.... asking $35
pm5/6 distributor cap... $5
88/89 (EF) front jdm amber turn signal covers.... $15
(6) oem/ aftermarket gas caps... $5 each
(1) set of EF spark plug wires NGK..... $10
(1) set of EF spark plug wires Bosch .... $7
(1) KYB (strut) mount kit..... $7... brand new
(6) sets of D-series injectors..... $30 per each set
(1) set of universal injector clips with wires.... asking $20
(1) mini k&n filter... $20
(1) hood pin latch kit... $20
(1) d-series exhaust gasket... metal... $5
(3) 88-91 factory headlight retainer clips.... $5 each
(1) EF map sensor.... $50
(2) washer fluid blue caps....$5
(1) set of EF civic/crx door seals.... $50
(1) EF map sensor.... $50
(1) 90 Honda Civic map sensor purge cut solenoid unit..... $50
2530 prop valve
(6) pairs of windows cranks... $10 pair or....$5 each
(3) stock 5speed shifter ***** $5 each
(2) sets of 88-91 civic oem battery tie down... $10
LS/Vtech steel braided oil line.... $30
(1) pair civic/ crx power door locks with actuator.... $50
(3) pair of windshield wiper arms...... $20 a pair
(1) universal door lock actuator... $25
(2) pair of rear pods for hatch... $20 a pair
(1) front ash tray for (EF) civic..... $5
(1) rear ash tray for civic...... $5 each
(3) dome light units..... $15
(1) rear view mirror... $ 20
(1) passenger side view mirror... $30
(5) corner dash vents.... $5 each
(4) visors... 2 driver .... 2 passenger.... $5 each
(2) front windshield wiper motors.....$30 each
(1) rear windshield wiper motor ...... $30
(3) door handle inside cover....$10 each
(2) dash change pocket... $15 each
(1) small dash compartment pocket .......$10
(2) JDM fog light switches
Rear brake tail light housing and cover... perfect condition..... $10
(2) ignition wire harness... $25 each
(1) driver side vent.... for (EF) dash...... $10
(1) crx corner rear glass peice... the small triangle piece..... $10
(1) interior fuse pannel cover... $5
(2) passenger grab bar... $5 each
(1) IACV for d16a6 or d15b1 or 2 series motor..... $20
(1) IACV for d16z6..... $20
(1) 88-91 Civic/Crx * HATCHBACK COWL PANEL WIPER COVER TRIM *EF.... $40
(1) main engine fuse box for EF......... $25
(2) pairs of EF hood hinges...... $15 a pair
front dash out of an Si (EF)... asking $75 or obo
center console for out of SI (EF)....asking $25
ceter shifter console......35
2 (EF) tinted front windows, driver and passenger for hatchback..... asking $60 or obo
civic/crx rear bumper with metal brace (black).... $80 or obo
EF front bumper metal reinforcement.... asking $40
CRX front bumper with corner lights.... $65 or obo
z6 intake manifold... no t/b.... asking $40
y8 intake maifold and t/b... full intake manifold... asking $65 or obo
y8 computer... p2p ecu... $30 or obo
clutch cable... great shape (used on car for 1 month)....... $25
set of stock d-series injectors.... have 4 in good working condition...... asking $40
pm6 computer... out of a civic SI....... $45
front bumper turn lights.... housing and lenses.... $20 or obo
JDM ITR front calipers with hub, rotor and mounting brakets and steel braided brake line conversion kit for a 88-96 honda civic--- asking $250 or obo
D16Z6 head... all complete just no valve cover... asking $150
D16z6 complete engine wire harness..... 130 or obo
pm me for any questions
#49
Honda-Tech Member